Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

I have a bit of a dilemma as far as the best splitter for my needs goes - the yard that I rent is not great, security - wise, and since PTO driven is out as we can't have a tractor there, we are left with electric powered which would still require an adequate generator (no mains power there), or one of the manually operated options. I like the idea of using one of the latter, but has anyone used one that is actually any cop and with sensible pressure, and can split fairly quickly? I'm not a major firewood producer and really most of it is arb waste; but currently everything is processed with saw and axe, which is getting a bit tiresome. Any recommendations for a decent foot powered splitter

Log in or register to remove this advert

Posted
34 minutes ago, Acer Forestry said:

A guy I know whom I spoke to yesterday, running a Posch PTO splitter suggested that his could be run off a Vanguard unit or similar, if correctly set up; is that the kind of arrangement you mean?

Hi Acer,    where ya based as i may be selling my petrol powered hydraulic splitter? 

Posted
43 minutes ago, wicklamulla said:

Hi Acer,    where ya based as i may be selling my petrol powered hydraulic splitter? 

Kent. We do get down to Devon in the summer / autumn but not very likely at present, as flat out with work. But do give me a buzz please, Phil 07808 738097

Posted

...It's only a hydraulic pump on a lil petrol engine ( and a oil tank )  , most engineering firms will knock you one up - then any hydraulic ram driven splitter will do , K

Posted

I run one of the 12 ton Rock splitters, it's not perfect but it would be a step up from doing it by hand. One advantage for you could be the size / weight as it is light enough to get in the back of a pickup or van so you could bring it home rather than storing it at your yard.

With one loading and one working the ram we can do a cube in about 45 minutes from arb waste, not lightning fast but we tend to split the nice stuff with an axe and sling the tough stuff in a pile for the splitter. A tip I got from one of the guys on here was to put it on a set of car ramps to lift it up to a more friendly height. 

Depends how much you are planning on doing as it could be a could be too small for your requirements.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.