Jump to content

Log in or register to remove this advert

Engraving chopping boards


jamesd
 Share

Recommended Posts

I've got to engrave a couple of chopping boards as a present for someone. I'll probably be looking to do  a few more wood working projects soon as well...

Whats the best way to go about this?

I've been looking at 1/4" routers and dremel engravers and wondered which would be best to use? it will be mostly for lettering not pictures or anything like that, I'm not artistic enough!

 

I'm sure i've seen a few people on here doing engraving? Ian Leach i think...?

Link to comment
Share on other sites

Log in or register to remove this advert

That looks pretty good to me! It will be in hardwood oak or beech and the lettering will be quite small i guess.
Flexcut looks like they do lots of chisels what ones did you use for your sign?
 

I used the mc150 and mc175 for this but for tiny writing id use the sk100 palm tool with a gentle mallet! For lettering you could start off with a v gauge meybs 70 and a flat sweep would get you started in the sk100 range. But for a little bit more you get a whole range.

E.g http:// http://www.ebay.com/itm/332379984201

They have doubled in price since I bought my last set 7 yrs ago!


Is go for a set, you get much more for you money and you'll find a use for the ones you didn't think you'd need
Link to comment
Share on other sites

  • 3 weeks later...

Hi James

Just noticed this post. I could laser engrave them for you if they aren't bigger than A3 in size (450 x 305mm). The beauty of laser engraving is that there is a colour change in the wood due to it burning the wood and the engraving stands out a lot better than if it had been carved.

 

Mike

Link to comment
Share on other sites

  • 1 month later...
  • 3 weeks later...
On 08/10/2017 at 13:23, jamesd said:

I've got to engrave a couple of chopping boards as a present for someone. I'll probably be looking to do  a few more wood working projects soon as well...

Whats the best way to go about this?

I've been looking at 1/4" routers and dremel engravers and wondered which would be best to use? it will be mostly for lettering not pictures or anything like that, I'm not artistic enough!

 

I'm sure i've seen a few people on here doing engraving? Ian Leach i think...?

 

IMG_20171023_174755065.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.