Jump to content

Log in or register to remove this advert

Any new small charcoal retorts out there?


Woodworks
 Share

Recommended Posts

Hi Steve

 

Probably just under 50% by volume. Never checked by weight but I fill 7 of these per barrel and they weigh around 2kg each. No obvious problems with warping since the initial burn and subsequent modifications. Snag is I don't make much charcoal so it's not getting worked very hard to show issues. Barrels are holding up remarkably well and still using my original ones. Not trying to keep the retort temps down now and run it between 500C-700C. It gets a lot less smoky above 600C. Just had a chap make 30 mile round trip to buy 10 sacks of charcoal as it's the best he has ever bought :thumbup1:

DSC06167.jpg.e4433b887a7e31aa81efc61450f92513.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

  richardwale said:
Looks great charcoal. How much do you sell 2kgs for?

 

Thanks Richard.

 

£5 selling direct and £4 trade. Financially it's madness when I consider the time involved in cutting, drying, loading, unloading etc etc but it's good fun non the less.

Link to comment
Share on other sites

  Woodworks said:
Thanks Richard.

 

£5 selling direct and £4 trade. Financially it's madness when I consider the time involved in cutting, drying, loading, unloading etc etc but it's good fun non the less.

 

Fit's my experience to a t Beau!

 

I think a small, cheap, manufactured retort for the hobbyist/small producer is a great idea though.

Link to comment
Share on other sites

Still mulling over the whole CE mark side of things. Cant even work out if it needs it or not from the guidance on this site https://www.gov.uk/guidance/ce-marking

 

From a quick search the Fourseasons one has a CE mark but cant find a webpage saying the Exeter has but doesn't mean it doesn't have one. In reality mine has more potential danger which is inescapable with changing charge chambers while everything is hot.

 

Could sell it as a one burn and if customers work out they can change the charge chambers while hot it's their own risk

 

So out of my depth with sort of stuff :confused1:

Link to comment
Share on other sites

  • 2 weeks later...

Hi, last week I knocked up a retort pretty similar to the one woodworks originally made. Fired it on Sunday afternoon, left it alone, result perfect charcoal.

Lit it again last night, get up all excited this mornin, look in my barrels, a **** load brown ends.

Any advice on what went wrong?

My only variables are, Sunday I used some kiln dried beach logs, which where standard sized and yesterday I used semi seasoned (down 12 months) ash but cut and split very small.

Also Sunday I panicked a bit thinking the gas hadn't come of so stoked the fire after and hour or so to get it roaring again.

Any advice greatfuly received

 

Thanks, ste

Link to comment
Share on other sites

  sjs5060 said:
Hi, last week I knocked up a retort pretty similar to the one woodworks originally made. Fired it on Sunday afternoon, left it alone, result perfect charcoal.

Lit it again last night, get up all excited this mornin, look in my barrels, a **** load brown ends.

Any advice on what went wrong?

My only variables are, Sunday I used some kiln dried beach logs, which where standard sized and yesterday I used semi seasoned (down 12 months) ash but cut and split very small.

Also Sunday I panicked a bit thinking the gas hadn't come of so stoked the fire after and hour or so to get it roaring again.

Any advice greatfuly received

 

Thanks, ste

 

I would be looking at the wood used and how wet it is. Only ever used very dry logs in mine off the advice of Openspaceman who says this aspect is makes a huge difference to a burn.

 

Did you vent the gas the same way as mine with holes drilled in the side of the barrel? If so interesting that you did not get any ash in the barrel if they were just left in the retort to cool.

Link to comment
Share on other sites

I cooked a batch of Hornbeam last week.

Pre-burnt it on the Thursday to drive off some moisture - took it to about 250 degrees and then shut it down. On Friday I lit it and fed the firebox until it was gassing well at 450 degrees and then closed the top vent, temps rose to 540 degrees and stayed there for the rest of the day.

On Saturday, I cracked the Retort open at 10am - temp was still 90 degrees and I had no brown ends.

 

The Hornbeam was felled between oct16 & march17 and has been air drying in the woodlands until last month. I split it into 400mm billets that were then thrown into the retort, with split logs to face up. [ATTACH]221611[/ATTACH][ATTACH]221612[/ATTACH][ATTACH]221613[/ATTACH][ATTACH]221614[/ATTACH][ATTACH]221615[/ATTACH]

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Read more  

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.