lux

Does anyone have a form covering assessments and protection measures for trees on building sites?

Thanks all.

Anyone on here run a fair sized tracked mulcher that would like to quote on a stage of works at a job in Haslemere.

Thought I would offer it up in here first before asking the likes of Kingwell etc.

Get in touch if it may be of interest.

Thanks.

As per Doobin.
Put up rated springs on so you don’t look overweight and draw attention.
Any 3.5t van with high sides that’s full of chip will be overweight.
It’s not big or clever but it’s the way it is .. I bought springs from midland road springs. They are rated 1.5t over and above the normal springs. Very pleased with them. When the barn doors are shut you wouldn’t know there was much in the back.

I had a similar stash, gave away the 5 200ts to a member who was going to build one decent one, last I heard he still hadn’t done it.
 
I would put up the 200s for £200 the lot, the 084 for £150 and chuck the rest in the skip.

I’m not fussed on a lot of the craft lager or IPA. They seem to make them very ‘floral’ which makes it ok for a pint but not a session beer. ..... oh wait maybe that’s the answer to reduce my consumption rate [emoji23]
If it’s a real beer I find it’s hard to beat Doombar or Tim Taylor’s ‘landlord’ is another good one but more often than not it’s a cold lager that hits the spot.

that's what i've been sent.
 
he says there is a line of the trees standing on a lane.
 
i'll ask for a photo of some of the standing trees.
 
 

Nearly everyone I know is.
I’m probably drinking the same as ever, but spreading it out over the week a bit more, I’m a traditional Thu-Sun caner.

So, who’s drinking more in the evening during lock down. ?

I’ve noticed I’m consuming more. Not that work has been much different to normal but definitely sinking more whilst in lockdown. Anyone else the same ?

Maybe I need another workshop project so I’m drinking tea instead of booze most of the evening [emoji23]

Dear All.

I’m looking to buy a predator 38x stump grinder.

Local dealer tells me shipment awaited and not here til July perhaps.

Anyone looking to move a low hours machine on?

I will consider comparable alternative makes of similar power output but having looked at a few machines I thought the predator suited my needs best.

Thanks in advance

Hi all,
 
 I have pretty much come to an end of 100 odd multitip teeth. Now I have got a diamond disk attachment that I used to sharpen a few when the last batch ran out but to be honest I have enough on my plate with out spending days sharpening 100 tears up and not getting them as sharp as new.
 I just wondered if anyone on hear sells their old teeth on or is it worth sharpening them? I’ve just ordered another 50 from multitip as I have a few grinding jobs on over the next few weeks and at down to my last 4.
 Any suggestions or advice welcome.
 
 Cheers people 

Just put a brand new chain on, left bolt a bit loose as I'm wary of how fragile this tiny thing is, chain became slack nipped it up slightly more nowhere near as tight as my 201s or 261 or 661 ect.... and it shit itself. I definitely wasnt heavy handed with it ever obviously something made it come out but saw has been babied more than any other bit of kit own. Loved the power to weight and the fact it has no chip in it but i love my fingers more 

Even if you only do one project and sell it on it’ll be worth it in the time you save.
I’ve not looked at the specs but I would imagine it’s hard to find one that will mortise 12” from one position.
Maybe be worth you buying a second hand one then reselling to minimise your loss. Just check chain condition etc carefully. Make sure everything locks in position And hasn’t worn.
Fantastic tools and will save you days and your sanity !

So long as Parker steel remain open[emoji23]

You’re not far from me iirc (midhurst) Drop in with it and I can take a look for you. 

Has it actually rotted through or is it just surface rust atm? Them one stop sub body's are tin thin and only last 3 - 4 year before they start going dodgy if its surface rust take it off get it shot / soda blasted then galvanised and it'll last a good few years 
Jack 
 

Anyone here sources a replacement tipper subframe for a transit or similar. I have a transit with a scattolini tipper. The van and the Arb back are in excellent nick but the subframe isn’t. Boulter tippers at Basingstoke built the conversion for me and could fabricate a replacement although quite pricey. So wanted to investigate if there are other options off the shelf so to speak.

Anyone here replaced theirs ?

We are still getting enquires Are people still delivering logs . Heating is one of the basic necessities in life. 

For mid size 50 -70 cc saws I run husqvarna now and I’m delighted with them.

Spud is on the forum. Have a look for his posts. He is a 2 stroke / small engine mechanic. He carries out porting / tuning work which will liven any saw up. Porting is common in the US but not so much here. He modified the exhaust on my 2511 and I love that saw. He’s ported a 50cc husky for me which zips pretty good now. [emoji106]
Re the ground saw. Both are great. The 620 is universally appreciated. If weight / size of saw is a concern get the 501. Run it in then port it. The only negative I’ve heard about the 501 is the air filter can allow some fines through although there may be a fix or echo may have changed the design but a really decent saw. I’ve found my echo kit very reliable.
Best thing about the 501 is it has no electronics to play up. Just a good old carburettor [emoji106]

The 501sx is your comparative ground saw cc wise but the next one up the 620sx is the pic of the bunch. Go for that.
Top handle if it’s from reductions get the 2511. Change the bar and sprocket to run the stihl chain. If you want it for larger take downs then the 360.
Run several tanks of through as they are tight when you and pick up in power after a dozen tanks of fuel. Then send it to spud to jazz it up and you won’t be disappointed [emoji106]

My ko2 all terrains are approaching 30k. Still plenty of tread. I run a hilux invincible 3.0l with remap. rd wise they get an easier time in 2wd. Decent off road. The only thing that stops them is heavy clay and that will do the same to any off road tyre. I’ll get the same when they wear out. Good value too really. I think I paid circa 750 fitted for a set. Balanced against lifespan and performance I think that’s well worth it.

Depends what cc you are looking to get
Ground saws the 501 and 620 are good mid sized professional saws.
The 2511 is a great little top handle and the 360 is well balanced.

I sent my 2511 to spud for some of his tuning and it’s a fantastic saw.

They have a new 70cc saw coming out soon and if you need something bigger there is the 8002. I’ve got one that’s been used about 4 times I might part with as I have loads of large saws.

Their pro range is good stuff. I just bought the new back pack blower and am pleased with it.

Hi Jack. Where are you based ?

Dear all.

I’m looking to extend my contacts base to give increased flexibility with staff / subbies for busy periods.

My company is based in Haslemere on the Surrey / West Sussex border. We carry out all manner of domestic and commercial tree care as well as some fencing and landscaping jobs although it’s unlikely we will need extra staff to cover these roles. Predominantly it will be for tree work.

I’m looking for experienced grounds staff who are experienced with rigging and lowering as well as contacts for climbers.

Starting pay for experienced grounds crew is £140 per day and increased rates for those bringing greater skill sets or climbing ability.

Please PM with any interest.

Thanks in advance.

I’d want £250 quid just to take away the van load of sawdust ringing that up will produce...........