jnoon
-
Posts
1,143 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by jnoon
-
.325 or 3/8ths the fav?
-
Some are larger but in the main I'm guessing 24" bar should fell from one side only a few bigger ones
-
Just cut TCD
-
There's some nice 30" ish sticks aswell
-
Hi all What's a good/average tonnage rate for Chestnut, Nice tall trees, must be 18-24" wide at stumps.(May be bigger) Cut, stripped out small ish stuff stacked for forwarder. Cheers
-
All nicely cut and split, mixture of oak beech ash syc, Douglas etc mixed hard and soft £110.00 1.5m3 load Moisture below 20 percent
-
Would love to charge £140 m3 Reality Is wouldn't sell a single log some customers grumble about £60 .75m3 loads Bugger
-
Any pics of 6100? Sent from my iPhone using Arbtalk
-
Spud took them 6 1/2 weeks, when it's run I'm might be up to you for a tweak, ( when warranty runs out) chap I was with today wants his 390 ported, can you do much with them?? Good gains?? so the 346 is still my favourite saw by far thanks, 👍 Sent from my iPhone using Arbtalk
-
First day with 372 today on new pot and piston it's going we'll, used a 390xp aswell corrrggghhh they go we'll with rakers down Sent from my iPhone using Arbtalk
-
Had a demo Very impressive bit of kit, Need to work out the figures to try and justify the £££ Sent from my iPhone using Arbtalk
-
Oh and the new bar arrived for the 356 xpg 18" Sugi Sent from my iPhone using Arbtalk
-
372 was picked up today new piston and cylinder Sent from my iPhone using Arbtalk
-
I did use my 346 xpg on a 15" last year , light pokey and warm hands 👍 Sent from my iPhone using Arbtalk
-
What experience have you has with them mate, I don't think 6 weeks is very acceptable, for a so called pro saw under warranty and it's still not back do you? Sent from my iPhone using Arbtalk
-
Hi Jon Yes saw came from Then 90 percent do the time I deal with fr jones as it's good service and good price and good customer service, Radmores have got poor customer service Sent from my iPhone using Arbtalk
-
No been nearly 6 weeks Jon Sent from my iPhone using Arbtalk
-
Hi TCDD Split fuel pipe and it lean seized Sent from my iPhone using Arbtalk
-
I have a 372 mate quite a good saw still not 100percent with the 576 seems a tad heavier for only a minor power Increase however the a v's are very low which i like Weight wise the 576 xpg isonly .1kg of a 390xp Sent from my iPhone using Arbtalk
-
With second thoughts eddy t I might just purchase a Sugi 18" for my ported 346xpg keep that until it' melts and replace with a 560xpg (Or treat myself at the apf) Wishing Radmores would hurry the f@@k up a bit it must be 6 weeks now and it's taking the piss Sent from my iPhone using Arbtalk
-
According to the stihl husk catalogues the 560 and 362 are the same weight and power I've owned both and hated the 362 think I will order a 560 in the morning Sent from my iPhone using Arbtalk
-
Split fuel pipe so lean seized, yes I would have done piston/cylinder however it's still under warranty hence the dealers Sent from my iPhone using Arbtalk
-
Thanks mate keen to get my 372 back it's been in Radmores 5 & 1/2 weeks now what a joke Sent from my iPhone using Arbtalk
-
No body has mentioned the 372 576 How good is the 576? Sent from my iPhone using Arbtalk
-
Michelin comp 4 good front tyre Ac10 for rear mate Sent from my iPhone using Arbtalk
