twmarriott

yeah we've a telehandler and log tongs to not so worried about that, tbh i've only got vertical as thats how i started out 20 years ago i'd be happy with a horizontal but needs to be able to cope with long and big diameter...

milling perhaps twice a week large diameter beaming through and through timber mainly hardwoods but large diameter over 1mtr and up to 36 foot, currently using a band rack and a circular rack with 8 foot blade but need to get more "up to date" and commercial, its taking too long and loosing too much in kerf. general thought were horizontal band mill but no idea what make or new/ 2nd hand... budget 10-20k? any ideas?

great shame I'd have bid 1500 if nearer, looks a nice stick, transport kills it for me!

I'm in a similar boat, currently using a 6'6 dia bladed rack with a 30 foot table, not cutting all the time, usually a fill in over wwinter, mainly beaming and planking oak for air dry/ historic building repairs, I'd like a wide blade quicker horizontal band mill, but at what cost? I've seen a few mizers and impressed in pine saw logs but not really with narrow bands through large dia hardwoods like we have to deal with.... any thoughts? best so far was a tom sawyer but again older tech. and like hens teeth to buy and hold their money.

yes depends on size, length/ girth and what you want for it?

no i agree, but you try find even the remains of a decent large horizontal for similar money? I've been looking for a forrestor / tom sawyer or similar about 5 years and nothing or crackers money. last one was over 18k!

I'd have jumped at it, looking for a forrester or large horizontal similar atm.

Atkinson walker did ours not long ago, Feb, but I know the chap who hammered them was coming up to retirement, ours is a 6 footer, I've 4 racks here, one set up and one rebuilt portable, one the others are projects. all stenner and gunn number 4s. the one set up is 28 foot steel table, hydraulic feed with 4 speeds (gearbox) and spool valve. if you look at Simmonds they supply the bits (teeth) EPS in wiveliscombe do them (Simonds agents) but best thing we got was a jockey grinder 110v and I can sharpen the 6 foot blade in minutes now, just looking to get a big horizontal now! the trees keep getting bigger!

sycamore

would be interested but depends where it is...?

try jonathan wheeler based near diss but also bardwell, 07929648369

pop is fine provided its not in contact with the ground. i'll post some pics of our telewag sheds later.

good stuff, if there are any sticks nearer the better I would be interested or in the slab green....

the rack is a smaller version of mine handy enough but not really up to commercial spec for modern milling, but handy enough to fill in and slab up or do some beaming, the proof of it would be in the blade and its a bit on the small side, if its no good then its scrap, good blade is worth 500 or so, they're 2600$ new in the states for a 60" one. as to the chainsaw mill, I'd be reluctant to buy a 2nd hand chainsaw, they're knackered too easily, defiantly a one man tool

we had a transwave it was very good until we out grew it.