Big Bolt

Hi everyone iv'e had a 28t for 3 years and it's done 465 hours it was converted for me to work in the norfolk broads it had the next size chassis fitted and i had to get some over size tracks 10 inch to give me a ground pressure of less than a man.It also a ride platform fitted as you could not walk behind it you sank in , Also fitted with winching eyes at each end and a belly plate fitted . I did have some initial proplems with it the tanks started to split with the vibration and these where sorted with the rubber mounted tanks [a later mod] i did have a clutch go after 15 hours the new one is still going strong. In my opinion 2 factors caused the clutch to fail 1 not bedding in the clutch correctly ,2 and over heating of the clutch assembly 1 was overcome by correct beding in somthing i was not told when i purchased the machine i sure it is explained now in the hand book . 2 over heating of the clutch was cured by taking the clutch cover of and fitting a electric fan onto the housing and drilling holes the opposit side so air could be blown across the clutch,the fan was a small radiator fan 8 inch of a car and was wired to a switch on the control box so in hot weather or hard work it could be switched on and of as required hey presto no proplems , all in all a very good machine Just on thing with the photo if you can see the cutting teeth working the sharp flint can see you the safty protection is there for a resone use it

When you do set them up use the newest blade you can as if you use worn one's when it comes to place a new one in the gap will be to small and ouch !!!!!!!!! contact wait out

You arnt the only one then david he qouted me 4.75 under 100 or 4.50 over a 100 plus carriage was free .confused .com

Hi mike are they a standard 7 inch glass and what type of head lamp bulb do they take

Is thier any more on the bags?

8.50+vat For One But With 4 Tips On It

THANKS FOR THE INFO I WILL GIVE THEM A TRY AS I ONLY SHARPED THE TEETH AND I HAVE GOT THE SEATS LEFT:001_smile:

Im after some teeth to braise onto the carriers multi tip they have been sharpend to the end of there life , im sure it must be cheaper to re-tip than buy new ones , anyone know where these can be got?

HI there how much per ton to haul down to NORWICH and when

Does anyone out there know where i can get a 6 blade knife for a kretzer log splitter used to be sold by Fuelwood: