Canal Navvy

Quite definitely the best hat stand I've seen on arbtalk 🙂

Have you tried a hot pressure washer/steam cleaner ? , they usually seem pretty efficient at taking paint off machines 🤔

Seen it this year in a still establishing mixed species farm hedge, be very surprised if the bird cherries survive 😐

Fascinating observation Wondering if the white combusts with less knock than the red and the drivers are subconsciously using more of the right foot 🤔

Worth being aware that the standard snap in rubber tubeless valve is only rated to 65 psi 😉

I'm on the same tyre but 255/85 r16 and on a 110 hi-cap. I run 35psi front, 50 psi rear. I started with getting the front tyres to a pressure that they looked and steered nicely then upped the rear pressures until the rolling radius was the same.

When she's finished you off ................................................................... ................. any plans for Daisy's future ? 😁

Generic 1600 kg tirfor, ifor tipper behind land rover with mini-digger aboard, cut stems to five foot , track up ramps with stem 😀 Distance is always the killer with bulk on haulage 😔

I wish somebody would offer me free standing firewood for the pleasure of felling it 🙂

If you remove it now pre-planning you'll remember it with a gentle regret 🥲 If you leave it and try to work round it you will certainly grow to hate it with a passion 👹

I used to think that the Duddon Valley was where I ought to be, trouble is all of the other visitors thought the same and now it's dead. Twenty five years ago there were two school minibuses and the pub had local accents in. Virtually any property that comes on the market gets snapped up by those who visited for all night drinking sessions and a good campsite when university students 😒

I was not totally convinced of the test, petrol car filled and returned to the same spot for refill (pretty standard practice), EV have a squint at what it's showing and take it back for another squint. Would have been much happier if the producers had used a site where both vehicles could have had consumption measured to weights and measures standards 🤔

In the past I've had some very nice brushed stainless steel thin sheet recovered from old redundant farm bulk milk tank 😀

They always used to be November the 5th specials ........ and when you see how quickly and how hot they burn you'd never want to live in one. The axle and wheels are worth saving if it's been boxed in out of the elements 😉

That is just trawling for a bite ....

Overcampacted clays are pretty resistant to water being able to get through. Plant roots (not just trees) can desicate clay to the point that rehydration is into years or decades. I have worked on structures that have sunk on desicated clays and are still supported on boulders of dry clay with cracks that water and the odd root use as a passage to the moister clay below. Old houses would have a well in the cellar so the water level would have been artificially lowered. Rain water butts and watered gardens were fairly normal. Old houses get bought by a different sort of people and adapted, ground water level rises and the building experiences changes that it hasn't seen in a a couple of centuries and people are alarmed to see a few cracks. Generally the problem is in the building industry particularly since it's been possible to get ground works signed off by an independent surveyor with no local knowledge of the local pockets of soil types, rather than the good old local building control. On puddle clay liners of canals it takes water something like six years to get from the top of a two foot layer to the bottom! Different types of clay have very different behaviours, some are good engineering materials, some are unreliable and some are destructive. It is quite easy to get a bit obsessed by clays 🙄

Subsidence and heave are terms related to how a clay soil acts on a man made structure, shrink and swell go on every year without anybody noticing. Railway tracks on Victorian embankments can change level seasonally by three inches and the speed restriction is just called engineering works. When a building sits on the ground it helps the shrink cycle and hinders the swell cycle, as Dr. Biddle puts it "a ratcheting effect"

Not actual comeback, but observation of a circa 1800s farmhouse being "underpinned" post removal of a monster leylandii. My best guess is that the corner of the building affected had previously been underpinned due to moisture deficit and subsequently returned to closer to the original level. In effect the house had only been made vulnerable to heave by attempts to remediate seasonal settlement, it probably would have been better historically to have diverted the downpipes to that corner to keep the clay hydrated 😉

The conservatory predating the tree is good. If there are no signs of settlement cracks on the conservatory then the risk of heave is minimal. The property is only about five miles from the site of the infamous candyfloss foundations so your client is going to be nervous 😉 It's generally accepted that phased fells are pointless 🙂

It would have been interesting to have seen the saw blade up against the marks to see if the lines were the same pitch as the saw teeth 🤔

The inevitable does feel uncomfortably close. I rather hope that those in power have reliable information about Putins state of mind/health and are prepared to make a wise judgement. Possibly the worst job in our country at the moment is being the captain of a vanguard sub equipped with trident.......would you want to wipe out the Russian people for the sin of not being able to control their leaders ? 🤔

Had the 4 speed zf auto in my land rover for years, don't really like towing with a manual now. Just select a lower gear before a hill and still get plenty of engine braking. A bonus is that if the trailer starts to wag at speed clicking down a gear stops the sway better than trying to brake 😉

If Russia is seen to get away with moving against the Ukraine then China has no reason to worry about making a move on Taiwan 😟

A good example was on a narrow path between a canal and a stream, the trees were getting tall enough to give concerns that they could uproot and empty the canal into the lower level stream. I took a third off the height of the trees that left them completely covered in ivy so then reduced the ivy to let the light into the newly exposed stem to encourage new growth. Some were completely cleared by stem severing and the plan was to observe the difference between the two approaches. The retention of ivy was being evaluated as it is viewed as being valued habitat by the ecologists who have a big say in future permissions 😉

A quick appeal to guerrilla ivy cutters......... Please look up to see if a climber has been up and reduced the ivy, proper soul destroying spending a couple of hours doing an ivy reduction only to find that someone has subsequently cut the stems at the base 😬