Stump grinder clutch

[Billy]

Where's the best place to get a clutch for danequip25sp ?

[Nick Connell]

I would give kim a ring at Danequip uk

+44 1420 476248

[openspaceman]

Where's the best place to get a clutch for danequip25sp ?

 

Kim at Danequip.

 

Might not be the cheapest though.

[Billy]

I've tried them, but can generally find most hinge substantially cheaper than here offerings, struggling a bit with this though

[openspaceman]

I've tried them, but can generally find most hinge substantially cheaper than here offerings, struggling a bit with this though

 

That's true of most OEM parts fitted by a manufacturer, the trick is to identify the original manufacturer and model. Sometimes a manufacturer will have a slightly non standard part modified for their use and the OEM part is only supplied through the manufacturer, like the brevini feed motors on a greemech, but other OEM parts do fit.

 

The original Doskos which where copied had no clutch and the wheel ran continuously, the electro magnetic clutch was a a retrofit for the Kohler engine, similar clutches are used on the vermeer stump grinders and Toro mowers but they all seem to cost about 300 quid.

[Graham]

We bought one from Flowfit in Ludlow for a Vermeer at a good price. Their supplier is based in N Wales. Either Colwyn or Rhyl. Can't remember which and I'm pretty sure you can go direct to them. If I remember their name I'll post it up.