Cs100 strapping down issues

[Guss109]

Cheers fella, makes perfect sense👍

Didn't think about opening the hopper🙄

 

 

No problem I've strapped my cs100 down like that the past two years and never had a problem. Just remember to run the strap inside the hopper or you might break the emergency stop button

[njc110381]

On my trailer the ramp tailgate is about the same height as the feed hopper. I use a strap with the ratchet on one end and then just a long strap that makes a big loop that you can tighten... Hopefully you can picture what I mean? It doesn't need hooks and just feeds back through it's own buckle. I run that through the bottom of the ramp, over the axle by the wheel and then under the machine and back over the axle by the other wheel. I then run it back out and up the outside of the tailgate, back in at the top and around the hopper in a similar manner. Tighten that up and it's rock solid. No straps needed on the front. It sounds long winded but takes maybe a minute to do

[marne]

For me a similar issue was solved by replacing the strap down belts.

For some reason they never stopped lengthening a few mm.

Went with those retractable ratchets and never looked back. A big time saver too.

 

Regards