Jump to content

Log in or register to remove this advert

Recovery winch


thetoolnut
 Share

Recommended Posts

I have one of these and a 12000lb winch. Portable Mobile Winch Mount Bracket Plate suits 8 - 13000lb winch WITH ADAPTOR | eBay

 

If you have a multi-hole drop plate on your tow bar, you can leave the receiver part on there as well as your tow ball. You could also make a mount for the front to accept it.

 

I just use a set of heavy duty jump leads to power it, suits me for a bit of log/tree pulling.

Link to comment
Share on other sites

Log in or register to remove this advert

Quick release Anderson sockets so you can use at front or back or use winch on another Truck , also you can get jump leads with Anderson sockets too .It won't be cheap running Anderson type cable full length of truck though ,a lot of folk seem to think the Trailer socket is ample But far from it.

 

Ste

 

I have a 175amp Anderson plug on the rear of my L200, it's a really useful addition. I switched my ifor tipper so it's runs off the car instead of its own battery, I also run a flatbed trailer mounted winch from it. Could easily make up some jump cables to connect to it, 12v grinder, fuel transfer pump if you were carrying a tank of red to site. Well worth doing in my opinion.

Link to comment
Share on other sites

I have one of these and a 12000lb winch. Portable Mobile Winch Mount Bracket Plate suits 8 - 13000lb winch WITH ADAPTOR | eBay

 

If you have a multi-hole drop plate on your tow bar, you can leave the receiver part on there as well as your tow ball. You could also make a mount for the front to accept it.

 

I just use a set of heavy duty jump leads to power it, suits me for a bit of log/tree pulling.

 

 

Now that is a neat idea and good value.:001_cool:

 

I have a 175amp Anderson plug on the rear of my L200, it's a really useful addition. I switched my ifor tipper so it's runs off the car instead of its own battery, I also run a flatbed trailer mounted winch from it. Could easily make up some jump cables to connect to it, 12v grinder, fuel transfer pump if you were carrying a tank of red to site. Well worth doing in my opinion.

 

+1 on the Anderson couplings but its worth going for the 350amp version if you are using them on a winch. Its also worth the extra for the handles, its so much easier to plug/unplug the critters when wet or icy. Its also worth putting them up out of the way of road grit and crap or get the rubber protective covers for them.

 

Bob

 

image.jpg1_zpscgryold2.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.