Am I being silly? 372 on a 16" bar?

[Cut4fun]

I've ran 16's on 084's 066's. 372 easy peasy too.

 

 

 

[Stubby]

That " spannie " looks like its off Mick Doohans NSR 500 GP BIKE !

[peatff]

You could run the exhaust through the front handle and turn the saw into XPG

[wild_hog]

Big bore is 77cc's ish. Here is a big bore ported a bit hot on a 2165:

 

 

 

18", 8 pin, stock chain, in a maple that's been sitting a while.

 

 

 

 

 

 

If it is a BB kit, I would highly suggest using a meteor piston and caber rings. The kits piston I have seen had more tolerance than I care for.

 

 

Try putting that into some Aussie Hardwood like some iron bark... Good luck.

 

 

Sent from my iPhone using Tapatalk

[TheHungrySquirrel]

Does such a thing as a 16" sugi bar exist for a 372?

[C.J]

Does such a thing as a 16" sugi bar exist for a 372?

 

Yes 16" is 60DL.

 

18" is 68 DL

 

But even with standard dogs the usable length is likely to be 2" less.

 

E.G with Standard Husky or Oregon bars on a 365 or 372

 

15" 56 DL usable 12.5"

17" 64 DL usable 15"

20" 72 DL usable 18"

24" 84 DL usable 22.5 "

[TheHungrySquirrel]

Yes 16" is 60DL.

 

 

 

18" is 68 DL

 

 

 

But even with standard dogs the usable length is likely to be 2" less.

 

 

 

E.G with Standard Husky or Oregon bars on a 365 or 372

 

 

 

15" 56 DL usable 12.5"

 

17" 64 DL usable 15"

 

20" 72 DL usable 18"

 

24" 84 DL usable 22.5 "

 

 

Thank you sir, I'm currently on a 22 which is just a little to long I think. An 18 or 20 sugi bar may be the best for me I think.

[NFG]

Thank you sir, I'm currently on a 22 which is just a little to long I think. An 18 or 20 sugi bar may be the best for me I think.

 

Hi

 

I got a 20" Pro lite for my 365 which I believe has the same mount as 372, cuts very well with that.

 

GROUP 4 Husqvarna chainsaws | Product Categories | Sugihara Guide Bars

 

 

N

[wyk]

Try putting anything in some Aussie Hardwood like some iron bark... Good luck.

 

 

Sent from my iPhone using Tapatalk

 

FTFY

 

BTW, this is the guy I got those numbers from:

 

[ame]

[/ame]

 

wyk

Edited December 26, 2015 by wyk

[TheHungrySquirrel]

So after a little searching I can't find a 16" or 18" sugi bar anywhere in stock.

After a solid bar really over the light weight,, just looks a little tougher.