Jump to content

Log in or register to remove this advert

MS230 upgrade time.. Ms231 or MS241?


Bob_z_l
 Share

Recommended Posts

Ok my last 230 has lasted 5 years before becoming unreliable. Beyond economic repair according to my local dealer. My previous saw lasted 11years before I killed it by messing with the mixture.

 

My question is....should I be looking at a Pro saw (241) or was I just unlucky with my last one?

 

They get used all weekend during the summer cutting logs. Occasionally during the week if the weather is good. Light use during the winter.

I only use Stihl oil and look after the saws...they aren't thrown around, but cleaned and checked before they are put away.

 

Bob

Link to comment
Share on other sites

Log in or register to remove this advert

It sound like you have put that saw to more use than it is designed for, ad they are not strong saws.

Upgrading to a pro saw is a good idea, but consider a larger one than a MS241, for cutting up the logs (unless they are very small).

A 550xp is a lot stronger than a MS241, and it isn't much heavier.

Link to comment
Share on other sites

Ok my last 230 has lasted 5 years before becoming unreliable. Beyond economic repair according to my local dealer. My previous saw lasted 11years before I killed it by messing with the mixture.

 

My question is....should I be looking at a Pro saw (241) or was I just unlucky with my last one?

 

They get used all weekend during the summer cutting logs. Occasionally during the week if the weather is good. Light use during the winter.

I only use Stihl oil and look after the saws...they aren't thrown around, but cleaned and checked before they are put away.

 

Bob

 

If your going down the stihl route,skip the 241 and maybe look at the 261.Its a pto saw and a decent all rounder and are going second hand around the £250-£350 mark.

Link to comment
Share on other sites

Hi

 

Clearly, the 241, 261 or 550xp are a significant step up in cost from a 230. There are a few fairly robust saws available for a bit less or a bit bigger for same ish money.

 

Search the forum you should find several threads covering the following:

 

Dolmar 420 - 42cc

Makita 5121 - 50cc

Echo 550 - 54cc

 

Local dealer support may influence eventual decision as its handy for nearby backup.

 

N

Link to comment
Share on other sites

Thanks for all the replies. I guess I knew the answer but as I had loads of 230 consumables that would be no good on a 241,261.

Thanks for the husky advice, without wanting to incite war. Like my stihl and have good dealer and parts access.

 

Bob

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.