Jump to content

Log in or register to remove this advert

Timber framing joints - top tips (preferably with diagrams) thread


SteveA
 Share

Recommended Posts

If it is of help to anyone I found that the National Parks Service in the States has published a good visual guide to timber framing techniques and it is available online. It is American obviously so it does vary from timber framing tradition in the UK but it is useful nevertheless.

 

https://ncptt.nps.gov/blog/historic-american-timber-joinery-a-graphic-guide-i-tying-joints-tie-below-plate-2001-14/

 

 

Thanks for sticking the link up - I found it once before as it's where I got the various rafter joints from but I could never find it again!

 

Alec

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 25
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...

a slightly better version of that joint would be to make the peg a bit of an X shape holding the two mating faces together even more. only works on very dry beams though.

 

 

interesting to see that the guy did most of it with handheld circular saws even though he has a perfectly good bandsaw behind him...

Link to comment
Share on other sites

a slightly better version of that joint would be to make the peg a bit of an X shape holding the two mating faces together even more. only works on very dry beams though.

 

 

interesting to see that the guy did most of it with handheld circular saws even though he has a perfectly good bandsaw behind him...

 

Or could wack four offset pegs down through it. cheers, steve

Link to comment
Share on other sites

  • 1 year later...

I found the attached article from 25 years ago about green oak framing for someone on another forum who was struggling to find it and thought it might be of interest to others. Interesting to see that 25 years ago this form of construction was viewed as 'rare' and it was the start of a revival. I particularly liked the section about using plumb bobs for marking joints, which I've see demonstrated but not seen in print before.

 

Andrew

The Journeymen - Building a timber frame.pdf

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.