560xp brake band problem

[TORNADOS7]

Mmmmmm, the ones I have done haven't, have you checked the inlet manifold and impulse connector yet?

 

Yes mate I stripped and cleaned it when I first got it as it was in right state, all seemed as it was intended !...

[Old Mill Tree Care]

I thought toffee would be quite tough.

After all they make the transit duratorque out of it...

 

 

It is tough but a few days ago the temperature exceeded 25 degrees so it went too soft.

[hamdogg]

Just gonna ask a question on here rather than starting a new thread! My 560 today chain brake stopped working! It's does snap on and off but chain still goes round! But seems to be struggling to lock on! Stripped down but can't seem to see what's up?

[adw]

The band is broken, some of the comments on this thread are unbelievable, how many times do we have to tell people not to run the bloody saw with the bar and chain removed and clutch still on, as for the 36/136/137 all having inherent idling problems, says who????????

[spudulike]

The band is broken, some of the comments on this thread are unbelievable, how many times do we have to tell people not to run the bloody saw with the bar and chain removed and clutch still on, as for the 36/136/137 all having inherent idling problems, says who????????

 

Why's that.....never had a problem:blushing: apart from dents in the ceiling and parts all over the shop:001_rolleyes:

 

Some people won't be told!

[adw]

Only a matter of time before someone is seriously injured.

[Breezeblock]

Just gonna ask a question on here rather than starting a new thread! My 560 today chain brake stopped working! It's does snap on and off but chain still goes round! But seems to be struggling to lock on! Stripped down but can't seem to see what's up?

 

mines broke on saturday just at the back of the screw where it goes into the plastic bush pop the band out and have a look at it its about £14 of eblag all you need to change it is a medium flat screwdriver

[hamdogg]

mines broke on saturday just at the back of the screw where it goes into the plastic bush pop the band out and have a look at it its about £14 of eblag all you need to change it is a medium flat screwdriver

 

 

Cheers!! I'll dig deeper and have a look!