Recommendation - Flail for a AGT 835.

[richy_B]

Hello all,

looking for a flail mower to go on an AGT 835. I'd like to keep it roughly the width of the machine for access reasons so around 1.3-1.4metres. I'll be cutting rough grass with some woody weeds/bramble mainly. Budget of £2k inc VAT. Obviously keeping the alpines working on slopes ability as much as possible.

 

Any recommedations?

[Tom D]

I have one of these;

Bargam S.p.A. - Sprayer Machine - polverizzatori - nebulizzatori - atomizzatori - sprayers - pulverisateurs - feldspritze - atomiseur - mist blower - atomizer - atomizadores - pulverizadores - sprgerte - automoteur

Takes 2" material with ease, and 3" with a couple of passes...

Not sure you'll get it for your budget though. maybe one of the lighter ones...

 

You can buy it from here Home | Cleveland Crop Sprayers Ltd

[Breezeblock]

how much hp do these take to drive

[richy_B]

Looks good. Can it go on the rear? I've emailed to get a price - Do you know a rough price?

[Tom D]

I think the one I had will be about 3K, its certainly well built, the 835 should lift it no problem, HP wise you should be ok, mine is 48hp but you could just go slower if the going gets heavy. Please note the one i have is meant to be driven backwards on a reverse drive tractor. IE the PTO goes the right way but you turn the seat round on the tractor. if you don't have reverse drive you'd be better with a different model. they have other lighter ones that will do grass and probably cost less, and also a heavier one that will take up to 6", but needs more HP...

[Ty Unnos]

Don’t go too big. I have run a 158 cm flail on my AGT835 and it only just manages it. When it hits rough stuff it tends to slow down and you have to go slow. I am thinking about swapping for a smaller one maybe 132 cm.

[Commando]

Speak to Jim at Riko, he can source an will give you good advice on what the 835 can handle.

[CHC]

Jim is not at riko any more