Jump to content

Log in or register to remove this advert

What size chipper/shredder?


Duncan R
 Share

Recommended Posts

Log in or register to remove this advert

My suggestions are;

 

Reduce the branches down with your MS181 so that all usable firewood is taken aside. Then chop up the rest to season as kindling.

 

The scraggy stuff and leaves, let them sit for a month or two and then have a bonfire.

 

Alternatively if you're dead set on shredding it;

 

Buy a cheap shredder off ebay and fill your boots,

 

Contact a local arborist and see if they can pass by your way and shred the lot for some beer tokens.

 

Buy a mulching blade for your brushcutter if you own one, and slam the lot to matchwood after in an afternoon.

Link to comment
Share on other sites

I'd reckon your best bet would be to stack the brash on your driveway, cut up ready to chip, butts facing forward, all clean, no rubbish in it, and ask politely for your local friendly tree cutter to chip it when they're passing. Should come to less than the price of hiring a chipper if you do everything you can to make life easy on them.

Link to comment
Share on other sites

Appreciate the replies......my thoughts were to de-limb (is that the right word)? the trees, harbour all usable wood then anything under 2 1/2" chip as I might well have a use for it. I have just utilised all the Ash....there is enough kindling to last god knows how long but it took a time to complete.

Link to comment
Share on other sites

My advice, hire a 6" TW or similar, chip as much as possible, mucking around saving twigs is a mugs game.

 

not if you have a use for them........... I agree from a time point of view which is what we view a job as but if time is not issue, why not utilise everything that you can?.

 

me personally if it fits it chips :):thumbup:

Link to comment
Share on other sites

Just thinking on a bit, how does Leylandi split when freshly cut? The stuff I have used before was split once seasoned..i'm thinking along the lines of a small electric/hydraulic log splitter to do the job.

 

Splits easy with a good maul and a bit of sweat so don't bother with a splitter unless you got back back or somthing.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.