Big Oregon bar

[wisecobandit]

Oregon 30 Inch Laser Tip Chainsaw Bars | Clark Forest

 

30" Bar

92 drive link chain

0.63 (1.6mm) .404

 

Basically a bar which was made for the stihl 070/090.

However it will also straight fit the 07 S, 08, 08 S, 050, 051, 075, 076, 084, 088, E30, MS880

 

The only difference is the 070/090 bar has an extra oiling hole in the bar.

[SawTroll]

Oregon 30 Inch Laser Tip Chainsaw Bars | Clark Forest

 

30" Bar

92 drive link chain

0.63 (1.6mm) .404

 

..... .

 

30" and .063 is obvious, by the Oregon numbering system - but hard nose bars aren't specified for any particular pitch, but for different nose sizes, "L" being the largest option. .404 is just one of the pitches that will work on the bar. The DL count will of course vary with the pitch of the chain

 

My "trouble" is that the E086 mount pattern isn't listed anywhere, E031 being listed for most of the saws you listed.

 

It could be as simple as E031 = Stihl 3002, and E086 = Stihl 3001 - but the evidense is lacking...

Edited April 23, 2014 by SawTroll

[wisecobandit]

30" and .063 is obvious, by the Oregon numbering system - but hard nose bars aren't specified for any particular pitch, but for different nose sizes, "L" being the largest option. .404 is just one of the pitches that will work on the bar. The DL count will of course vary with the pitch of the chain

 

My "trouble" is that the E086 mount pattern isn't listed anywhere, E031 being listed for most of the saws you listed.

 

It could be as simple as E031 = Stihl 3002, and E086 = Stihl 3001 - but the evidense is lacking...

Same as the carlton s2 mount

 

Cannon Super Bar Chainsaw Bars Mikes Chainsaw Shop

[Redthunder]

I'll list it on eBay for Stihl 070-090 30" bar. .

[Eddy_t]

Mount pattern looks identical to my stihl bar

So it's either 090g or 051/076

That's the one off my 090

 

 

Sent using Arbtalk Mobile App

[Redthunder]

Thanks for the replies. And thanks to all the posters who put in the time to look up this information for me.cheers.

Edited April 24, 2014 by Redthunder

[doobin]

Mount pattern looks identical to my stihl bar

[ATTACH]154452[/ATTACH]

So it's either 090g or 051/076

[ATTACH]154453[/ATTACH]

That's the one off my 090

 

 

Sent using Arbtalk Mobile App

 

That bar looks tired.

 

Say, I know where there's one for sale....

[SawTroll]

This may help in the future:

Oregon Bar Part Numbers.pdf

Edited April 25, 2014 by SawTroll

[Eddy_t]

That bar looks tired.

 

 

 

Say, I know where there's one for sale....

 

 

Which one? The first pic is the original type bar, bare metal with the stihl log logo, the other is a newer west Germany bar, both are still good

 

 

Sent using Arbtalk Mobile App