Fencing quote

[dig-dug-dan]

Good access for a knocker to get in decent knocking maybe a bit hard as its been grass a long while but soil all way to depth no chalk or flint 51 in total to be done

 

 

Sent from my iPhone using Arbtalk

 

on my own with my tractor, 2 days easy. sounds pretty straight foward

[Jimbob87]

on my own with my tractor, 2 days easy. sounds pretty straight foward

 

 

That would be good going thats 408 posts and 741m of stock 741 m of barb and 204 rails in two days.

 

 

 

Sent from my iPhone using Arbtalk

[Jimbob87]

That would be good going thats 408 posts and 741m of stock 741 m of barb and 204 rails in two days.

 

 

 

Sent from my iPhone using Arbtalk

 

 

Well i think it is lol maths is not my strong point

 

 

Sent from my iPhone using Arbtalk

[s.varty]

Why not sub it out to dig dun dan?

[bobh]

Did some several years ago, all rails, no netting. Seem to remember them taking a LOT longer than we thought, fine if it's just a throw it together job but to get the spacings, heights and angles right took a while. Remember as its square all the posts have to look right from ALL angles.

 

Sent from my Nexus 7 using Arbtalk mobile app

[miker]

i would be charging something like that,2 blokes would need to get at least 10 done a day to make half decent money, i would go with £3.50 p/m labour, and 10% on top of material cost.

[dig-dug-dan]

Did some several years ago, all rails, no netting. Seem to remember them taking a LOT longer than we thought, fine if it's just a throw it together job but to get the spacings, heights and angles right took a while. Remember as its square all the posts have to look right from ALL angles.

 

Sent from my Nexus 7 using Arbtalk mobile app

 

true. best add a couple of hours on the third day to be sure:001_smile:

[bobh]

true. best add a couple of hours on the third day to be sure:001_smile:

 

😁👍

 

Sent from my Nexus 7 using Arbtalk mobile app

[Kev Stephenson]

£100 a unit all in (£50-55 for materials). 2 men would do well to be completing a unit an hour with a post knocker by the time you have off loaded what you need and measured up at each location. It's not like doing a 300m straight run.

 

5 mins per post, 5 mins to put the 4 rails on, 5 mins for the mesh, 5 mins for the wire and 5 mins to get to the next one is your hour.

[Kev Stephenson]

on my own with my tractor, 2 days easy. sounds pretty straight foward

 

My back side you could.

 

Come up here and I will pay you day rate and be a millionaire by Christmas!!