Jump to content

Log in or register to remove this advert

Bulk oil delivery


case mx270
 Share

Recommended Posts

Log in or register to remove this advert

When I ran an Ag Machinery business I bought UFO in bulk, a big 600 ltr tank.

 

It was the worst move I ever made.

 

The mechanics would take about 20 minutes filling 20 litre cans to go out on a tractor service (lot of oil in a back end!) and time is money. Also there often was not enough time in the day, I needed them out of the yard early.

 

And then one of them left the can filling while he went for a leak, but the leak turned into an emergency dump, and we lost around 100 litres over the stores floor.

 

Went back to 20 litre cans, it worked out far cheaper.

Link to comment
Share on other sites

When I ran an Ag Machinery business I bought UFO in bulk, a big 600 ltr tank.

 

It was the worst move I ever made.

 

The mechanics would take about 20 minutes filling 20 litre cans to go out on a tractor service (lot of oil in a back end!) and time is money. Also there often was not enough time in the day, I needed them out of the yard early.

 

And then one of them left the can filling while he went for a leak, but the leak turned into an emergency dump, and we lost around 100 litres over the stores floor.

 

Went back to 20 litre cans, it worked out far cheaper.

 

We have been through the exact same thing :biggrin: several times. I bought a samoa pumped system with triggers that measure the volume. You can set it for 20 litres and walk away. The other advantage to your method is you always have nice new clean cans on site.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.