Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

I have bought circa 2 acres of standing timber for clearfelling consisting mainly of oak ash and birch. Real nice timber but it hasn't been looked after or maintained and as such some areas are quite dense with brambles and briars. I was thinking today while I was whipping away with a slasher, there has got to be a handier way.

 

I reckon a srtimmer/brushcutter with a metal blade would be a much better idea. Cound anyone recommend any particular make and model which would stand a bit of work. Something that I could trim grass at home with too.

 

I have a budget equivalent to a used MS200t. Im going to sell one of my saws to fund the brushcutter.

Log in or register to remove this advert

Posted

You need to use a mulching head not a cutter. If cut you end up with 6 foot longs bits of barbed wire like dried brambles that trip you up for years to come.

The Stihl mulcher is excellent, cuts them into 4 inch bits and will even grind the roots out on lighter less stoney soils.

Unfortunately you need a powerful machine to drive one but I've done about 4 acres this year and it's excellent.

Posted

look for a good second hand sthil or husky with a 50cc engine then you can if wanted put a clearing blade on it with a mlcher blade will kill the brambles. leave some though for wildlife. lot of woodland butterflies and moths like brambles and good cover for ground nesting birds

Posted

Put a few decent tops on the trailer so they hang on the floor and go for a drive. Though to be honest when felling you just don't walk backwards in your type a's and you'll be fine. Especially if it's a clear fell.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.