Jump to content

Log in or register to remove this advert

ms180c causing problems


Scott Of The Llandow
 Share

Recommended Posts

Hi,

I was hoping for some direction in trying to sort my saw out, has been running fine, but now will fire up and die after 10-30 seconds, it sounds like a kill switch has been pulled no coughing or spluttering. it will start back up on the first pull after it has died, so seems to be getting fuel through. i have tried removing the fuel cap but that doesn't make a difference it just runs fast and then dies. the dealer i bought it from a few years ago (2nd hand) reckons i need a new carb but thats £60+ for a Stihl i only paid £85 for the saw! I have taken the carb off and stripped it down, all the diaphrams and stuff looked alright, fuel hose tank etc looks fine.I am a poor student at the mo so can't pay loads on just trying stuff, what can i do next:confused1:

 

Atb

Scott

Link to comment
Share on other sites

Log in or register to remove this advert

I would check the condition of the spark plug. Check the condition of the ignition cables as well and clean the contacts of the on off switch. Not saying that's the problem but I would check them.

Link to comment
Share on other sites

I would check the condition of the spark plug. Check the condition of the ignition cables as well and clean the contacts of the on off switch. Not saying that's the problem but I would check them.

Cheers Gnome, that all seems fine too, unless its intermitent , as i said i don't really want to keep replacing parts in a process of elimination if i can help it

Link to comment
Share on other sites

Over revving before dying would be a lack of fuel issue. Or too much air getting in. As above what colour is the plug..

 

How does the compression feel? If you can get a tester on it do so.

 

Cheers Rich, yes it over revs before dying, don't think it is getting too much air plug quite dark, maybe a bit of a heavy mix with the oil but in the past but this has been drained a feww times and 50:1 has been added. Compression is great, no problem there i have had a look at the piston from the carb and exhaust, both sides look fine, no marks or scratches.

 

Ta Scott

Link to comment
Share on other sites

Here you go:

 

stihl chainsaw ms180c spares or repair | eBay

 

Add the £60 you were going to spend, plus a little extra and have a brand new one from Jonesey for around £200.

 

Thanks Doobin, i never really looked at the small ones to buy, only the bigger pro ones. Not a bad price i will have a think about that, see if i can get some cash together

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.