Anyone run a 660 on 20 ins bar thanks all

[AlvinD]

Hi Jon, inspired by your reminding me of the small bar on the 66 I went and got it out, I had forgotten it wasn't running right:sad: so have spent the day tinkering rebuilt the carb etc etc eventually went for a pressure test and found half the head gasket had dissolved and fallen out from the front

So no fun for me

 

On the plus side found a 024 under the bench and cleaned it up runs a treat not the 66 though

 

All he best rich

 

You must have a lot of saws to forget about them

[RDB logs]

I think it's hoarding:thumbup: don't tell mrs b

[john p]

runnin a 25 0n my 084,tis good

[mendiplogs]

Hi Jon, inspired by your reminding me of the small bar on the 66 I went and got it out, I had forgotten it wasn't running right:sad: so have spent the day tinkering rebuilt the carb etc etc eventually went for a pressure test and found half the head gasket had dissolved and fallen out from the front

So no fun for me

 

On the plus side found a 024 under the bench and cleaned it up runs a treat not the 66 though

 

All he best rich

 

HI RICH you will soon get it going all the best jon

[mendiplogs]

runnin a 25 0n my 084,tis good

 

HI JON that sound good mate :thumbup1:jon

[colwoodlandcare]

i run a 36 ,28 and an 18" on my 660, with the 18 i have the rakers filed down quite a bit and the chunk fly off her

[Eagle]

20" on my 660. Works a treat!

 

 

Sent using Arbtalk Mobile App

[mendiplogs]

20" on my 660. Works a treat!

 

 

Sent using Arbtalk Mobile App

 

HI ALL a big thanks to all who has post on this :thumbup1:jon

[mistahbenn]

I run an 88 with a 14 inch bar.

[Alex Reid]

Had to run mine on an 18 inch bar the last week as 1 saw was in for a new pump the other cutter was on the 261 and my 361 one packed up on a Job away it absolutely flew through timber but normally on a 30 inch bar