cutting down ropes??

[adamkaye123]

i just bought a lanyard off honey bros (tachyon one eye splice) i ordered 3m and i was sent 5m can i just cut it down to length that i wanted or is there a special procedure to conform with LOLER etc?

[munkymadman]

just cut it

[John Shutler]

i just bought a lanyard off honey bros (tachyon one eye splice) i ordered 3m and i was sent 5m can i just cut it down to length that i wanted or is there a special procedure to conform with LOLER etc?

 

why not keep it at 5m and daisy chain the end, instead of cutting off the end and having a useless 2m length:confused1:

 

or il swap you a new 3m for your new 5m:001_tongue:

[adamkaye123]

why not keep it at 5m and daisy chain the end, instead of cutting off the end and having a useless 2m length:confused1:

 

or il swap you a new 3m for your new 5m:001_tongue:

 

haha i just find the daisy chain looks a bit cumbersome p.s i want the 3m! not 2 im not jumping up confiers

[Gollum]

cut it and record it on loler sheet. No problem.

[adamkaye123]

cut it and record it on loler sheet. No problem.

 

whats the best way to cut it down?

 

(sorry if you find these stupid questions)

[Acg128]

whats the best way to cut it down?

 

(sorry if you find these stupid questions)

 

Chainsaw

[Ewan Murray]

WHat John means is once you have cut it into a 3m lenght you will have 2m thats pretty useless, wrap with electrical tape cut with sharp scissors or knife then seal the end with superglue or melt with a lighter.

[Ian Clarke]

Get an old kitchen knife heat it on the gas. Wrap the bit of your rope your are going to cut at point of where you are going to cut it. Cut through the tape and rope in one hit *hopefully* the knife will need to be v hot look for a nice cherry red. Cut and heat sealed in one fell swoop