Greenmech quad chip 160 pros/cons

[Ty Korrigan]

All right, I'll try it myself, maybe I'm missing something, it will be fun anyway, I've got lots of spare lengths of pipe around the barn.

Ty

[Gray git]

Nice 1 will give it a go as only a matter of time till some prat stops and blames a bit of woodchip for the chip in there windshield or car paintwork.

[bdyson]

Hello, help needed please, I've recently bought a quadchip 160 and the revs are going way to low before the no-stress system kicks in, I've been told that I can set the revs higher from the control box......does anyone know the sequence to change this please. It's not in the instructions book supplied with the quadchip, thanks in advance, brett.

[PeteB]

Hi Brett, call the office tomorrow when you are stood by the machine. Press the button to be put through to Service and either Mac or Jason will talk you through it. Cheers.

[leswold]

Same machine (quadchip 160) but different query. Do they all leave a pile of fine woodchip/dust about a foot high, on the ground beneath the flywheel box? Had the 1st service recently & nothing was found wrong & I've gotten used to it anyway, but just wondered...

[Ty Korrigan]

Us too.

Ty

[leedeerman]

Had some issues with both of ours which we had from new. Some serious, however Green mech sorted them out. They are good like that.

[bdyson]

Hi Brett, call the office tomorrow when you are stood by the machine. Press the button to be put through to Service and either Mac or Jason will talk you through it. Cheers.

Thank you Pete, will do.

[inthewoods]

The tw150 is as good as it is bad, if you're doing domestic then the turntable hopper will make your life much easier. Have used the tw150 more & it's a good machine but have found on the whole greenmech to be faultless, apart from beat up mk1 dinosaurs. For the money & what you get, the greenmech wins every time

[Gray git]

Same machine (quadchip 160) but different query. Do they all leave a pile of fine woodchip/dust about a foot high, on the ground beneath the flywheel box? Had the 1st service recently & nothing was found wrong & I've gotten used to it anyway, but just wondered...

 

Yeh my quadchip did the same. Chipper poo 😜

Loved that little chipper and I do miss the turntable on some jobs, just wish they did a 8" version.