pto driven splitter

[bradshaw groundcare]

hello i have put a wanted add out for a pto driven splitter.

 

who has what and what do you think of it ?

[bulklog]

Ive not seen a pto driven one . But we use a hyd one that runs off the tractor hydro pipes its 15ton ram and a valve so pretty basic really . Works great ive just bought some longer hoses for it so i can use same tractor for the processor and splittes at the same time . Sorry to go off topic . Steve

[difflock]

Would this not be a tractor linkage mounted with a PTO driven integeral hydraulic pump on the splitter, i.e. self contained hydraulics?

Its a lot faster than using the hydraulics off most older tractors.

I think this is the set up for a lot of the semi professional/professional stuff?

Cheers

M

[bradshaw groundcare]

Would this not be a tractor linkage mounted with a PTO driven integeral hydraulic pump on the splitter, i.e. self contained hydraulics?

Its a lot faster than using the hydraulics off most older tractors.

I think this is the set up for a lot of the semi professional/professional stuff?

Cheers

M

 

thats what i am after, we have a david brown 780 with temperamental hydraulics.

[Marko]

I have a 10 tonne splitter driven from either the tractor hydraulics or a separate pto pump. It works far better on the PTO pump.

 

I also have a 22 tonne splitter that has its own PTO pump built in. Great machine.

[chainsawdom]

i have a thor 13 ton magik i run of my kubotas pto excellent log spliiter i got mine from m large.

[Stephen Blair]

I had the 20ton Thor pto, awesome!

[chainsawdom]

I had the 20ton Thor pto, awesome!

 

you had deans old one didnt you so have you sold it now that was a serious splitter i bet there wasnt a lot that wouldnt split.

[mendiplogs]

I had the 20ton Thor pto, awesome!

 

HI i have a pto 20 ton posh for sale it on arb trader thanks jon

[rowan lee]

Got the thor magik 13ton (pto) as well. Its a vertical splitter, with a two speed auto return ram. The oil reservoir is built into the main housing of the splitters mast. Its got dual controls, but you can use a single lever initially to wedge your billet/block in place under the blade before you engage full hydraulic power (leader control system).

I run it on just over tick with an old 35x, the shearing power through knots is very impressive. Great piece of kit, very well built, simple and reliable.