Jump to content

Log in or register to remove this advert

Fencing stakes that dont rot required.


tommer9
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 27
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Can anybody help out there?

A fencing contractor friend of mine requires 1000 4-5" TD 5'6" long fencing stakes for a coast path job. The problem he has is now that the powers that be (in their infinite wisdom:sneaky2:) decreed that the active ingredient in tanalised timber (arsenic) could no longer be used, stakes are barely lasting 3-5 years before rotting off, this is not acceptable at the best of times, but especially not on this particular project.

Are there any suppliers (in the UK preferably) who can supply a product that will give at least ten years, as used to be the case?

Ta.:001_smile:

 

thers them plastic post , reclaimed stuff :001_smile:

Link to comment
Share on other sites

down here they are called a post saver. heat shrunk plastic wrapper for the post

 

Thats the stuff, not very good if driving posts in hard ground or stony conditions because can damage the sleeve. A lot of people (farmers) also just use normal tanalised timber and old engine oil, creasote mix, make up a 45 gallon drum full and fill with posts till it soaks right through.

 

Aaron

Link to comment
Share on other sites

Try these Manufacturers of Poles, Sleepers and Pressure Treated Timber | Calders & Grandidge. They can supply timber pressure treated with creosote, not the usual water based crap which rots off in less than five years :thumbdown:

If not creosote then use a decent wood instead - oak, chestnut, larch etc. :thumbup1:

 

nice one pitty they they not on our side of the water

Link to comment
Share on other sites

Can anybody help out there?

A fencing contractor friend of mine requires 1000 4-5" TD 5'6" long fencing stakes for a coast path job. The problem he has is now that the powers that be (in their infinite wisdom:sneaky2:) decreed that the active ingredient in tanalised timber (arsenic) could no longer be used, stakes are barely lasting 3-5 years before rotting off, this is not acceptable at the best of times, but especially not on this particular project.

Are there any suppliers (in the UK preferably) who can supply a product that will give at least ten years, as used to be the case?

Ta.:001_smile:

 

 

Use stakes made from Larch, they'll last for 10 years. Untreated.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.