Jump to content

Log in or register to remove this advert

constricted Beech


John Shutler
 Share

Recommended Posts

cable installed to brace an adjacent tree. Beech has been constricted and has partially occluded over the cable. it is not possible to remove the cable from the beech

 

moribund crown apex and chlorosis of canopy above brace,increased crown density below brace

 

just interested in what peoples possible management would be

 

jobs booked in

59765e58abf1e_os009.jpg.cece54fc22b3a7ccd264858b80ee01ba.jpg

59765e58a8fcf_os008.jpg.1b89a657b46af0966e46884cf4dc4a90.jpg

59765e58a6cad_os007.jpg.ab3134ed41440ab2b8cdc4ab0c847c0b.jpg

59765e58a2eb8_os006.jpg.68dacb95300fe6f4fad3a49d998036d2.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

If it private and you can not remove the constriction, then you have two choices:

Skyhuck has eluded to one.

Do nothing and let it do its own thing, and at some point in the future it is going to structurally fail.

You could reduce some of the crown to reduce the stress on the co-dominant forks. But you will be left with large wounds, which are not going to help the trees health.

Link to comment
Share on other sites

Being a tad dense here John.

Why's it not possible to remove the brace ?

Because it's still bracing the other tree ?

If so, could you not re-set a new brace & remove the offending one?

 

Or can't you remove because it's practically too constricted ?

 

 

 

D :001_smile:

 

 

 

.

 

Spot on with your 2nd answer David. The tree has occluded so far over the cable we won't get it out.

The braced tree will be supported with a new freestanding pole type brace

Link to comment
Share on other sites

Can you not angle grind it out ?

 

 

 

.

 

Good question. No signs of that canvas (?) strap being cut. Low tech tools like hammer, chisel and pliers can also pull semi-swallowed straps out.

 

What is swallowed may not lead to failure. Tissues can graft outside the girdle. Cutting/scraping bark that is "included" can spur grafting. Nothing to lose by trying?

 

Why not install a proper brace for that fork, if that was part of the original purpose, by drilling a 7/16" hole above the union and install a 3/8" cable with end fasteners?

 

Why not install an eyebolt to guy the other tree to?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.