What's on your bench today?

[GardenKit]

echo strimmer parts - help

 

the part number on echo SRM-302BDX is Echo 61090504930 as far as i can see.

 

 

thanks folks

Just checked that part number Mike, sadly it is listed as 'obsolete'

[spudulike]

HELP

 

i have a husqvarna strimmer, the exhaust has fallen off, due to bolts working lose, tried tighting, but they just spin!

 

Help what can i do?

 

glue the bolt back in to hold?

 

A number of options: -

1) retap to the next size up ie - M4 to M5 or M5 to M6

2) Helicoil the hole

3) Fit an insert - this will be limited to the land around the hole

 

The helicoil is probably the best option - I usually add a little stud lock around the helicoil to ensure it really holds damn well:thumbup:

[spudulike]

echo strimmer parts - helpanti vibe mounts all broke when machine dropped - rubber separated from metal - anybody ever stuck rubber to metal like that (jb weld??) on av mounts - they also hold the shaft and clutch to the body of the strimmer.

 

the part number on echo SRM-302BDX is Echo 61090504930 as far as i can see.

 

any body recommend an echo dealer / parts store?

 

thanks folks

 

JB weld won't hold rubber to steel, cyanoacrylate (Superglue) may but it doesn't always last!

[Adamam]

262Xp revs higher held on either side than upright.

 

Crank seals?

 

Anything else it could be?

 

As usual, any help gratefully received!!

 

[Rich2484]

Crank seals Adam.

 

Three mower blades sharpened and one ms200t sorted, just awaiting a chain break handle. And a bearing for a greenmech cm220 to fit but unsure if it correct. Awaiting reply.

 

No show on the baby front yet so getting some workshop time.

[Adamam]

Thanks Rich!

 

[Rich2484]

Or it could be the fuel filter getting stuck, does it do it with a full tank?

 

But sounds like seals, a vac and pressure test will tell for sure.

[swinny]

Anyone ever heard of a Hsts lawnmower?

[Richsark]

Here we go again, just brought this from my neighbour for £50.00 I wanted to give him £40 but I lost the toss, it's a non starter.

So at the moment it's on the freezer till I make space on the bench, can't say no to a old tool.

My missis says I'm the old tool for buying all this sh**!

Oh it's a 051AV

Any tips before I open it up:biggrin:

[Rich2484]

Agree with the missis before opening it up.

 

Check for spark would be the first point of call. Then check fuel.