What's on your bench today?

[Charles Hey Arborist]

Yeah and realised it was too slow!

[burrell_]

:lol:

Think I would the the dark lord port that 395 mate give it some zing

[spudulike]

You never ported that395xp of mine did you? Mate keeps wanting me to ask as it cuts so much better now!

 

I have a 576xpg (non auto tune I think) that keeps cutting out at the end of cuts, as soon as you let off the throttle. Does it more often when using half throttle. Really really annoying! Any ideas?

It runs fine starts fine, idles fine. Dies immediately at the end of a cut, not die slowly. 5-6 pulls and it starts again.

 

Know where I can get any big saws spud, 3120xp, 880 etc?

 

Your 395XP just had a good going over:thumbup: The 576 sounds like the carb tuning is wrong, possibly needs richening on the L screw but difficult to tell without seeing it.

[spudulike]

:lol:

Think I would the the dark lord port that 395 mate give it some zing

 

I think Matty was happy...once I opened up the muffler like I wanted to in the first place:001_rolleyes:

[MattyF]

Bah I recon it was all in the advancing the timing! Things mental now though

[spudulike]

Bah I recon it was all in the advancing the timing! Things mental now though

 

Bit of both probably, bet it kicks now and then:lol:

[Eddy_t]

That 576 is a nice saw its just a wind up it keeps cutting out

 

He only wants a bigger saw because he had a play with the 076 lol

 

Big saws are fun, you had a go with your 070 yet?

 

 

Sent using Arbtalk Mobile App

[burrell_]

No got 2-3 small problem with it

Oil pump don't work is the biggest one

I will have it to bits and have a look

 

The saw looks like its done very little work under the covers the paint work is like new

I'm starting to get a good collection of big saws

[Eddy_t]

No got 2-3 small problem with it

Oil pump don't work is the biggest one

I will have it to bits and have a look

 

The saw looks like its done very little work under the covers the paint work is like new

I'm starting to get a good collection of big saws

 

When you say oil pump, I assume you mean the automatic pump? You'll need to split the pump tank and replace the diaphragm but check the impulse line and the bolt to adjust the oil flow.

Have fun

 

 

Sent using Arbtalk Mobile App

[burrell_]

Cheers for the pm eddy

Rite iv bin having a play yeh the chain oil pump the manual bit don't work have not tried it running

Now inside the recoil cover there is a bit of metal with small teeth if u follow the rod it takes u to the choke

Am I rite in saying the teeth with the bit of metal is a governor setting