saw clip

[morten]

Mines on my komet too, no problem:thumbup1:

 

What about providing a picture of HOW you did it?

 

That would be helpful to the guy that can't seem to fit the Caritool.

[TreeTomass]

That is a good idea morten, i might post a photo later of HOW i fitted it if I have time:lol:

[RobRainford]

caritool small here, fits nicely on the petzl harnesses!

 

if you want easy release, get a large caritool and remove the wire gate, then it just sits in and pulls out with no gate opening

[Dwc]

Saw this on a American site. Looks heavy duty. Maybe a bit too bulky?

[treequip]

You can buy those in the UK, they are useful when using bigger saws because you can clip the back handle into the hook which makes it hang nice and snug

 

Chainsaw Karabiner - Sorbus International Ltd

[bob]

bargain compared to a carrytool:001_smile:

[roseyweb]

Thats where i put my caritool but it would slide forward and onto the d ring, right old pain

[flushcut]

I use a Black Diamond bent gate biner with the gate pin notch filed off. You can load and unload with one hand.

[treequip]

bargain compared to a carrytool:001_smile:

 

Yup it is a bit on the pricey side, but I have broken 3 carrytools and it’s inconvenient when they go half way through a job.

 

They are fine for lighter gear but I don’t use them for saws any more.

[morten]

Here's how I have attached the Petzl Caritool (large) to my Komet Butterfly harness.

 

It was a bit of a squeeze to mount it, and I have attached a cable-tie to keep it in place, as it otherwise worked itself loose.

 

Mind you, it's a lot easier to install the Caritool on the Petzl Sequoia harness (but coming from the same company, it would be).

Edited April 3, 2011 by morten