Double Dawg problem

[Samuel]

bought another dawg for the saw but they wont line up, how can i solve this problem?

 

was thinking of buying a set of 066 dawgs for it, will that work?

[slack ma girdle]

Why bother, if the saw is sharp you don't need them.

[Mike Hill]

Grind the left side back and reshape?

[RobRainford]

look for the set of the 660 arctic, they stick out more, might be slightly more on the outside then, but see, is that a 660 in the pic?

[Frankie Lawrence]

what saw is it? on smaller saws your never realy going to need two.

[liamjordan]

i put 044 dogs on my 361, they did the same, i just filled out the holes a little on the outside ones to make the even

[Samuel]

look for the set of the 660 arctic, they stick out more, might be slightly more on the outside then, but see, is that a 660 in the pic?

 

the saw is an ms460

[RobRainford]

the saw is an ms460

 

 

or that. The muffler was confusing me. the dogs off the 660 will fit, are they a matching pair or are they the original 460 one and odd one from another saw?

[Jewillo]

You can get a set of new dogs fom stihl made for the job. I think they are called felling spikes fit perfect i changed them on my 046 and i belive they are a good addition.

[Samuel]

or that. The muffler was confusing me. the dogs off the 660 will fit, are they a matching pair or are they the original 460 one and odd one from another saw?

 

thanks for that rob, will buy a set of 660 dawgs for it:thumbup:,will i have to buy both of them or just the one on the chain case? and i bought the other dawg for my 441 which i then sold