wish list

[High Scale]

I was using a 10 inch PTO chipper like yours last week on a site clearance job, it was excellent, shame it wasn't mine. Cost the owner 5k.

[Mike]

I was using a 10 inch PTO chipper like yours last week on a site clearance job, it was excellent, shame it wasn't mine. Cost the owner 5k.

 

Machine pictured is the 550ZX 12" behind a 140hp Valmet. Feed funnel is the hand fed version but lends itself to crane feeding very well. The feed rollers operate at 250 Bar and the top one is driven through a reduction gearbox for extra power. Not sure why the chipper has reverse as haven't used it yet. New it's yours for under £15k + vat. Thats alot of chipper for that type of money.

 

Crane fed mdel available

[High Scale]

Machine pictured is the 550ZX 12" behind a 140hp Valmet. Feed funnel is the hand fed version but lends itself to crane feeding very well. The feed rollers operate at 250 Bar and the top one is driven through a reduction gearbox for extra power. Not sure why the chipper has reverse as haven't used it yet. New it's yours for under £15k + vat. Thats alot of chipper for that type of money.

 

Crane fed mdel available

 

 

I will take two, just charge it to Rollers account.

[A_lopa]

Nice set up Mike,would be handy here on cypress windrow takedowns.

[Ian F]

Nice Pic Mike

 

Which show was that taken at?

[A_lopa]

23 meter tadano tower,on a hino carrier.

[Buzz]

Mike it can be reversed so it can go on the front of a tractor or mog. I've used that chipper it's not bad but to damn heavy !

[Mike]

Nice Pic Mike

 

Which show was that taken at?

 

Demopark in Germany. Brilliant show as HSE didn't exist. You could have a go at using whatever you wanted.

 

Buzz

 

Anything is poss but the 550 without the Crane is 1700kgs. Might stretch even the biggest Mog that. 550U is the best option at 1300kgs with counterweights over rear axle (unless crane on rear). You also need h/d front axle on Mog. This is where you prob know more than me. Apparently its the one with more wheelnuts?.

[Steve Bullman]

im looking at a second tractor at the moment. im not sure wether to go for a smaller road legal tractor or just get an old off road work horse for yard work only