Jump to content

Log in or register to remove this advert

samson tenex


John Shutler
 Share

Recommended Posts

i tie my own hitch cord,so the worry of splices is not an issue for me,the thing that concerned me was the possibility of burning the cord out.(pete made it sound like it was easily done).i personally havnt found any problem with overheating.

think it may just have been alot of ifs and buts

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 32
  • Created
  • Last Reply

Top Posters In This Topic

tenex was actually the first cord i used when i first switched to the v.t, that was a length with eye slices......didnt give me much room to experiment with wraps and braids, but i do remember it being very smooth for the first few climbs, but after a bit of glazing it did start binding a bit....at over £10 for an eye to eye length it was too expensive to justify throwing it out after a little glazing.

 

mind you...i view most of the high heat resistant cords in the same light....they glaze and lose their performance....sure they may have 4 weeks climbing left in them but still.

Link to comment
Share on other sites

I've never used hollow braid poly (tenex, Yalex, etc for a hitch cord as it's too soft....unless it's spliced up in such a way as to create a core...which is how the cord that Sherril sells is made. Still don't like it for a Vt, works fine for distel/schwabisch.

 

And it will burn like normal poly double braid. Not a problem if you're careful.

 

The new hi temp cords are the way to go. I don't like Bee Line--too soft. i like HRC, and haven't used Bailout, but hear it handles very well, and is nigh onto impossible to wear out.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.