Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Does it hold it's position well after adjustment?

 

Problem with my Butterfly II is that the straps creep after each climb so I have to constantly readjust it.

 

How are the quick release buckles holding up? They look a bit plasticky.

Log in or register to remove this advert

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Posted

it is a dream to put on, to get off, you can actually walk about and forget you have it on. Normally you hit the ground have a moan and recover then drop the harness, this fella you are quite happy to start cross cutting or something. Best harness so far, loads of areas to adjust and make even better. may put a second swivel onto bridge, just to get that oh so sexy clanging noise. Then you know your goin somewhere

Posted

Like the bespoke bridge tony - I've had the standard one on mine for a long while and it still feels that a hefty swipe with a silky might put an end to it all - what diameter rope sheath have you used and any tips on tying off the ends?

Posted

'Twas 11mm Velocity (applied with violence, frustration and anger) and the ends are secured with a rather ad hoc mix of insulation tape, shrink wrap and whipping. The whipping is the key, stitched parallel with the bridge, which allows the paw to slide over it without catching.

 

A product of trial and frequent errors... :D

Posted
I've just bought the sequioa SRT and find it very comfy. One thing that does slightly worry me though is the screws coming lose in the gold gates. How is everyone finding these? Are they holding up to daily use?

 

Also, something I've noticed in the instructions that you get with the harness is that the attachment bridge and each side D ring are only rated to 15kN. This seems quite low to me considering most karabiners are rated to 30kN. Any comments.

 

 

 

Thanks

 

Gary

You will be attached to both the side d's at one time or to one side d and something on the bridge. 15kn X2 =30kn.

Posted

Also, something I've noticed in the instructions that you get with the harness is that the attachment bridge and each side D ring are only rated to 15kN. This seems quite low to me considering most karabiners are rated to 30kN. Any comments.

 

your not meant to hang off your side d's anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.