Jump to content

Log in or register to remove this advert

Recommended Posts

Log in or register to remove this advert

Posted
On 05/12/2025 at 13:54, openspaceman said:

I doubt it and I bet they cost a lot. Stirling engines are typically in hermetically sealed units, like freezer compressors, to prevent leakage of working gas.

 

The only DIY thing I would consider would need petrol, diesel, LPG or mains gas. A small water cooled engine  and in my case just running to charge a battery an hour or two a day in winter.

 

i'll give it a miss then.  Nothing drives me mad than proprietary equipment that you can't work on.  New cars and dealer only stuff but also I lived in a house for a while where the previous owners burglar alarm company refused to give me the admin code and tried to put me on an annual contract just for changing batteries and vacuuming dust out of the sensors.  I won in the end, the previous owner was under contract not me.   

  • 1 month later...
Posted

Nearing the end of fitting a new Morso 6143 free standing 5KW stove into the new property, we had the same stove in the old place and were more than happy with its performance. 
Had to remove a manky old polluting coal fire and seal up the fire place, few late ones over the holidays but looking forward to lighting it up tonight, bit of pointing etc on the brick slips should see it completed. 

IMG_4630.jpeg

IMG_4654.jpeg

40a93b41-e1b8-423e-a696-59b543bd8618.jpeg

2ad0de6f-18c8-44ee-a4a8-e366513861a1.jpeg

  • Like 10
  • Thanks 1
Posted (edited)

That’s looking good.

PS I wouldn’t want to load that toolbox up with tools, it would way a ton😀

 

Edited by roys
More detail
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.