Jump to content

Log in or register to remove this advert

Chestnut collapse whilst climbing.


Graham
 Share

Recommended Posts

I posted a thread recently re. Pleurotus on an Aesculus we were to fell and just wanted to check they were Pleurotus:001_tt2:

 

The tree is an old pollard situated in the corner of a cemetery. The crown was thinning with Psuedomonas present but looked stable. My intention was to set up a zip line to whizz small sections over the gravestones and reduce the drag to the chipper by 50m.

 

Climbing the tree to fix my anchor I noticed tiny brackets forming in pollard unions which I thought were Ganoderma spp. The tree felt ok on the climb so was not unduly worried.

 

I moved to the opposite side of the tree to fix the zip line high and it didn't feel right. I looked down to see movement in the pollard union and....craaaack I was swung into the centre of the crown. Pulled shoulder and grazed and bruised leg. In 30 yrs climbing it's the only tree I've made a grave misjudgement on its stability.

 

002.jpg.28b9c3620e46cfe83fe75e5d31b482cf.jpg

 

006.jpg.a9939a0d3c39d6a39d26646f3a4cbece.jpg

 

008.jpg.2eb780ce6de5c3f3bfc322120814e8a4.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

dead chestnut is very brittol, unlike dead elm which is quite chewy and even hard as hell. If the chestnut has had leaf minor then it will be scary climbing, kick hard with your feet and cut off anything that you think is dodgy.

 

hope you are ok graham, just goes to show no matter how long you have done this job you can NEVER be 100% sure.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.