Jump to content

Log in or register to remove this advert

Fs460

ChrisOdo

By ChrisOdo,
in Landscaping

 Share

Recommended Posts

  • 1 month later...

Log in or register to remove this advert

AngrySquirrel Experienced

AngrySquirrel

Posted
Posted
On 20/05/2021 at 16:28, ChrisOdo said:

Currently using an fs460 for clearing. Frustrated with autocut heads and guards. Anyone tried a small head on it by changing the nut?  Or alternative guards without the larger lip?

Your help would be greatly appreciated

Have a look at Oregon Jet pro heads 4 blade will work on 460 i use the Techni blade shreds everything

Link to comment
Share on other sites
doobin Grand Master

doobin

Posted
Posted

I run 460s. No guards. 4 way head with 2.7mm cord for thicker stuff- twice the cords, half the wear. The smaller head with the larger nut and 2.4mm cord is my go to for grass and soft things like thistles, and I highly recommend it with no guard. You can run a fair length cord like that. 
 

I couldn’t get on with jet pro heads. Always felt like it wasn’t cutting very efficiently as it had worn down a bit, but wasteful to change it! 

Link to comment
Share on other sites
Stubby Grand Master

Stubby

Posted
Posted
37 minutes ago, doobin said:


 

I couldn’t get on with jet pro heads. Always felt like it wasn’t cutting very efficiently as it had worn down a bit, but wasteful to change it! 

You are like a Jack Russel with a rat  Ruben ! 😁

Link to comment
Share on other sites
AngrySquirrel Experienced

AngrySquirrel

Posted
Posted
16 hours ago, doobin said:

I run 460s. No guards. 4 way head with 2.7mm cord for thicker stuff- twice the cords, half the wear. The smaller head with the larger nut and 2.4mm cord is my go to for grass and soft things like thistles, and I highly recommend it with no guard. You can run a fair length cord like that. 
 

I couldn’t get on with jet pro heads. Always felt like it wasn’t cutting very efficiently as it had worn down a bit, but wasteful to change it! 

Other gear fits in the heads also been using some twist cord that stays in head ok so can use 6ft lengths ok!!!

  • Haha 1
Link to comment
Share on other sites
Stubby Grand Master

Stubby

Posted
Posted
5 hours ago, AngrySquirrel said:

Other gear fits in the heads also been using some twist cord that stays in head ok so can use 6ft lengths ok!!!

Ok , ok . I can strim a cricket pitch in one pass 😁

  • Haha 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  •  

  • Featured Adverts

  • 3
    Cassian Humphreys

    Tree Welding & Natural Grafts - The Magic of Myrtaceae

    5
    matt padden

    Stihl ms461 parts

    9
    Lev Community

    Arb Chip Wanted

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept