Jump to content

Log in or register to remove this advert

ascending with hitch climber


OlaBola
 Share

Recommended Posts

decided to try the hitch climber pully tree manager set up, using a schwabish (I think that's how you spell it!) prussik. It works well in the canopy when my feet are in contact with the tree, but I found it was really difficult to ascend when I had no contact at all with the tree, just dangling on my rope and sitting in my harness. Using an old prussik, I used to grab the rope between the prussik knot and the karribiner with my right hand and push the prussik with my left and could ascend the rope relatively easy, but I couldn't really acheive this with the schwabish and pully.

Does anyone else have this sort of problem, or is it just me?

 

Cheers folks, Ola

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 21
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Put a sling or prussic loop between the HC and your bridge, then haul underneath the whole system. Once you get up re attach to bridge and off you go. You should be able to see it in this vid.:001_smile:

[ame=http://www.youtube.com/watch?v=-DlMeIHejZk]YouTube - 200' Fir[/ame]

Link to comment
Share on other sites

Put a sling or prussic loop between the HC and your bridge, then haul underneath the whole system. Once you get up re attach to bridge and off you go. You should be able to see it in this vid.:001_smile:

 

Nice video shows why I've been making hard work of it

Link to comment
Share on other sites

thanks for the replies folks, any input is really appreciated. If you watch the video the climbers feet are in contact with the trunk as he ascends. Imagine his top anchor was away out on a limb and he couldn't come into contact with the trunk/tree at all (like a spider dangling on one strand). That's what I was finding difficult to do (ie with no contact with the tree).

Link to comment
Share on other sites

thanks for the replies folks, any input is really appreciated. If you watch the video the climbers feet are in contact with the trunk as he ascends. Imagine his top anchor was away out on a limb and he couldn't come into contact with the trunk/tree at all (like a spider dangling on one strand). That's what I was finding difficult to do (ie with no contact with the tree).

 

You keep the system the same as the video and footlock the tail, I was doing this today, I find it easy enough, although a pantin would be even easier.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.