Jump to content
Sign in to follow this  
Swampster

Echo 2511TES, help!

Recommended Posts

Replacing a broken throttle trigger and this is my first venture into the inner workings of this model. A tiny 3mm ball bearing has dropped from the handle assembly and onto the worktop. Where has it come from?

Share this post


Link to post
Share on other sites

Mine is back at the dealers, dying for no reason, pig to restart.

 

Usual scenario with the mechanic ‘you don’t know how to start it’ etc.

 

Took the plug out and discovered the spark was weak and intermittent.

 

We will see..

Share this post


Link to post
Share on other sites

Surely not a 3mm ball bearing in the throttle linkage? Have a deeks at the parts diagram? Often sheds some light

astinaacceleratore251153.jpeg

Share this post


Link to post
Share on other sites

Could well be a 3mm ball of crap that’s accumulated rattling about in the handle, I’ve seen them before.....

Share this post


Link to post
Share on other sites

I have never came across any ball bearings in the handle! Could possibly be from the inside of the on/off switch but they are fairly well sealed.

Unless they fall out and I just don't notice, I will check the floor of the workshop tomorrow. :)

 

Mick, have a look at the fuel pipe as I have seen a few split right where it attaches to the filter in the tank,  which then causes then filter in the carb to get blocked.

  • Thanks 1

Share this post


Link to post
Share on other sites

Thanks all. 

These haven't caused any trouble for us yet in two years. One tune up,  but that's been it until the throttle trigger snapped (thanks for the replacement Mark @ Skyland). They're like powered Silkys!

Enough of this work stuff now.... 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.