mx 220vs tw 150

[john@arbtech]

ok it appeared me and john were editing at the same time.

 

No probs then, all friends?

[Johny Walker]

are we not of topic now

[john@arbtech]

are we not of topic now

 

AYE!

[Steve Bullman]

No probs then, all friends?

 

indeed:001_smile:

[Peter]

Are you thick? a T/W dealer (senior management) said ' they might be, **** but they are cheap' ??? make of that what you want

 

No, I'm not thick. Are you?

 

Now you have actually put up a post that makes sense, I completely understand what you are saying.

 

By the way, are you ever going to explain your snide remarks about the treemotion? Now you have started making posts that actually make sense, I'm all agog.

[josharb87]

Matty, I would go for the Timberwolf for reasons of newness and good dealer backup. If you can, get a 190, it addressed all the problems the 150 had.

The schliesing is not a bad chipper per se, but the TW will serve you better.

 

 

having only used a 190 for a day, but a 150 every day, what are the problems its rectified?

[Mr Ed]

On the 150? Tiny useless bearings and shaft, small infeed aperture, appaling knife change access, aluminium blower paddles. All much improved on the 190.

[josharb87]

ah ok, agree infeed hopper is a pain. although i wasnt overly impressed with the 190 (tracked) in chipping capability in comparison

[Peter]

What engine did you have in the 190? I have used the 45hp turbo 190 and it chips very well.

[josharb87]

same i guess

 

 

found that the rollers kept getting jammed, was over a year ago now, but remember not being overly impressed with it comparing it to the 150, i thought i should have been more impressive than i was