Jump to content

Log in or register to remove this advert

Anyone want a Sugi 20" 3/8 bar?


Sambo
 Share

Recommended Posts

I fitted a 3/8 picco bar and chain on my ms261 an 25" bar on my MS461 and the 20" doesn't get used! 3/8 picco is so good for me on the 261 that I use that pretty much for everything!

 

So let me know if you can use a bar?! 

Link to comment
Share on other sites

Log in or register to remove this advert

I fitted a 3/8 picco bar and chain on my ms261 an 25" bar on my MS461 and the 20" doesn't get used! 3/8 picco is so good for me on the 261 that I use that pretty much for everything!
 
So let me know if you can use a bar?! 
Interesting post, I have a 25" on my 461 and was thinking about getting a 20" but not sure I would actually stop and take time to change it over. Thought it might be another reason to buy that 365 I don't really need, could keep 20" on it.
Link to comment
Share on other sites

1 minute ago, Dan Maynard said:
46 minutes ago, Sambo said:
I fitted a 3/8 picco bar and chain on my ms261 an 25" bar on my MS461 and the 20" doesn't get used! 3/8 picco is so good for me on the 261 that I use that pretty much for everything!
 
So let me know if you can use a bar?! 

Interesting post, I have a 25" on my 461 and was thinking about getting a 20" but not sure I would actually stop and take time to change it over. Thought it might be another reason to buy that 365 I don't really need, could keep 20" on it.

Well Let me know dude! it's sitting on a shelf in my Garage! 

Link to comment
Share on other sites

On 11/06/2018 at 22:35, Sambo said:

I fitted a 3/8 picco bar and chain on my ms261 an 25" bar on my MS461 and the 20" doesn't get used! 3/8 picco is so good for me on the 261 that I use that pretty much for everything!

 

So let me know if you can use a bar?! 

When you changed to Lo Pro You didn't mention swapping the Drive Rim/Sprocket did you do this along with bar /chain? Just curious

Link to comment
Share on other sites

5 hours ago, Little Al said:

When you changed to Lo Pro You didn't mention swapping the Drive Rim/Sprocket did you do this along with bar /chain? Just curious

Yep when you change to 3/8 picco you change the sprocket pitch too. I bought the Stihl "Tuning Kit" which included a 16" bar, 3X 60 link loops of 3/8 Picco super chain and a 3/8, 7 tooth sprocket rim. must be why it slipped my mind - the kit is so easy to swap over I forgot I'd had to do the sprocket!!

Edited by Sambo
correction
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.