Jensen Feed Rollers

[WesD]

14 minutes ago, swinny said:

Need pictures lol  sounds like mines missing out on some modification

Did you get discount?

[TTownsend]

1 hour ago, WesD said:

Ours is a a528t so has 2 springs, yes its crazy to think they wear but when you consider the amount of use and hammer they take!

 

http://www.dennisbarnfield.co.uk/ we get spares from here, ask for Richard he deals in Jensen for them. 

Had a A530 spring snap on before so it does happen 

[Coletti]

Need pictures lol [emoji3] sounds like mines missing out on some modification

I'll get one in the morning. Not sure if yours is the sub 750kg model but that may have something to do with it if it is

[dan494]

1 hour ago, Coletti said:

 

I'll get one in the morning. Not sure if yours is the sub 750kg model but that may have something to do with it if it is

 

Mines the 750kg version and one spring so could be.

Can't see how you'd get 2 springs on it though as it's all inline

[Woodee]

Thanks All for the advice Think I'll get a dremmel and replace the spring

Mine's a 2009 model with a single spring with a couple of adjuster nuts top and bottom I had to remove the whole unit and put some heat on it to free up the nuts!!!

Also WesD I take it the £180 was for parts only ?

[swinny]

Mines a full fat tracked machine

 

 

seen some with a piece of angle iron on the chassis to mount the spring straight up to the roller

[WesD]

2 hours ago, Woodee said:

Thanks All for the advice Think I'll get a dremmel and replace the spring

Mine's a 2009 model with a single spring with a couple of adjuster nuts top and bottom I had to remove the whole unit and put some heat on it to free up the nuts!!!

Also WesD I take it the £180 was for parts only ?

Yes parts delivered. It isn’t a hard task to change them. 

 

I was pretty full on today but ill post pics tomorrow.

[Coletti]

Mines the 750kg version and one spring so could be.
Can't see how you'd get 2 springs on it though as it's all inline

Mine is the full fat so that's probably part of the weight saving. The springs are mounted either side of the top roller. All will be explained when I get a pic in the morning.

[carlos]

used a grinder with a sanding disc on top and bottom rollers to good effect, didnt take out the bottom roller but seem to remember one of the lads found a plate that could be removed on the bottom which helped accsess. (didnt actually do the job myself).

[Coletti]

Mines the 750kg version and one spring so could be.
Can't see how you'd get 2 springs on it though as it's all inline

Here you go