Jump to content

Log in or register to remove this advert

Can/should this oak be saved?


Fisherman
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

U could try to pollard it but i doubt it would survive, be too harsh and taking to much off in 1 go.

A local estate has tried to pollard some big oaks (althou not quite as big as that 1) in a SSSI and a high % die, just too much stress.

A lot of the ancient oaks badly need re-pollarding but probably been far tong since they were done and wouldn't survive it, probably a few hundred years since last pollarded

Possibly if its in decent health apart from crack in good soi and has a wet summer it might live.

 

If u try and fail u can still fell it anyway, if u fell it it doesn't have a chance

 

Possibly u could limb the leaning limbs off it leaving the straight up leg, so taking the side pressure off but leaving middle 1. If the side legs start to grow at the pollard u could mibee take the middle 1 out a few years down the line if needed

Edited by drinksloe
Link to comment
Share on other sites

Hard to say for sure without seeing the tree in person. However, if the tree owner wishes to retain it, I reckon it should be possible. Some good advice from drinksloe above. Can the track below it be diverted a little, what is there it could hit if it fell? A few neters reduction of height and width can reduce stresses low down by a surprisingly significant amount, so all hope is far from gone!

Link to comment
Share on other sites

It's impossible to say without actually looking at it. However, it might be possible to regain a reasonable level of stability by crown reduction.

 

Pollarding it is likely to result in so much dysfunction that it will die within a few years.

 

Assessing the risk it poses (i.e by considering the target/s, size of the part and the likelihood of it failing) should form the basis of your management decision in this case.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.