Forestry mulcher teeth.

[Notmegov]

Hi..

So the second hand Seppi has arrived but I know little about these machines. So need some advice

From the photos do these teeth have any life left? And if not where is the best place to buy some new ones?

 

 

Many thanks

 

Tom

 

Sent from my SM-J510FN using Arbtalk mobile app

[openspaceman]

Hi..

So the second hand Seppi has arrived but I know little about these machines. So need some advice

From the photos do these teeth have any life left? And if not where is the best place to buy some new ones?

 

 

Many thanks

 

Tom

 

Sent from my SM-J510FN using Arbtalk mobile app

 

As long as the holder wasn,t affected on the Awhi and Plaisance I kept them until there was no carbide left but you do need to stop and check frequently as the steel wears very fast once the carbide is gone.

[Mulcherman Chris]

Hi..

So the second hand Seppi has arrived but I know little about these machines. So need some advice

From the photos do these teeth have any life left? And if not where is the best place to buy some new ones?

 

 

Many thanks

 

Tom

 

Sent from my SM-J510FN using Arbtalk mobile app

 

 

They look to have a fair bit of life in them. I advise to keep half a dozen spare teeth on the tractor, as openspace said they soon wear fast when the carbide tip goes. If there's any thing you need to know just drop me a message and I'll be happy to help. Chris

 

 

Sent from my iPhone using Arbtalk

[Notmegov]

Brilliant thank you all. Any ideas where I can buy some spares?

 

Sent from my SM-J510FN using Arbtalk mobile app

[Mulcherman Chris]

Not sure who sells the Seppi stuff for genuine parts but I'm pretty sure 'Flails Direct' sell teeth to fit the Seppi machines. Chris

 

 

Sent from my iPhone using Arbtalk

[aspenarb]

Brilliant thank you all. Any ideas where I can buy some spares?

 

Sent from my SM-J510FN using Arbtalk mobile app

 

 

We run a few Seppi`s and get our flails from Lamberhurst engineering, they keep all the other bits for them as well.

 

Agricultural, Forestry, Groundcare & Horticultural Machinery | Lamberhurst Engineering

 

Bob

[openspaceman]

Brilliant thank you all. Any ideas where I can buy some spares?

 

Sent from my SM-J510FN using Arbtalk mobile app

 

 

Also see if Glyn at qrms does them

[monkeybusiness]

We run a few Seppi`s and get our flails from Lamberhurst engineering, they keep all the other bits for them as well.

 

Agricultural, Forestry, Groundcare & Horticultural Machinery | Lamberhurst Engineering

 

Bob

 

Hey up Bob - did you ever have any luck with the Berti hammers? I'm assuming not!