Jump to content

Log in or register to remove this advert

sandspider

Veteran Member
 View Profile  See their activity

  • Posts

    1,743

  • Joined

  • Last visited

 Content Type 

Everything posted by sandspider

  1. sandspider
    One of our burners was installed with the wrong sealant in that flue to stove join. Melted every time the stove got hot and seeped out like that, and it smelt horrible when it burned on the stove. Installer came back out and replaced it, blamed it on a bad batch of sealant and it was fine after that. But it melted and smelt grim every time, not just occasionally.
  2. sandspider
    I season wood in a polytunnel, which has mesh covered windows. Usually it seasons well, but I often get drips / damp patches by the windows, especially on the upwind side. Depends on if your mesh is under some sort of roof I suppose, to keep direct rain from falling on the mesh?
  3. sandspider
    I like the Titan electric chainsaw, but have never used their splitters. 4 ton wouldn't be enough for my gnarly logs, a 7 ton forest master does a much better job.
  4. sandspider
    And the paint comes off them easily. But good splitters!
  5. sandspider
    -6 this morning, 13 on Sunday apparently!
  6. sandspider
    I put a bit on the compost heap, fill holes in the drive with it, top up low patches in the paddock... Having said that, my Burley stove is very efficient, so doesn't produce too much ash for the amount we use it.
  7. sandspider
    I knackered my right wrist a couple of years ago, still not healing. I used to use an X27, but the occasional go with it after wrist injury made it flair up again. (Mind you, so do most things - including hammering, so don't think it's the fibreglass shaft). I got a smaller X10 which I use left handed (feels odd but works OK), or sometimes borrow a Forest Master 7 ton duocut electric splitter. The latter is good and powerful - slower than the X27 and tyre when splitting straight ash, but it will munch through things I couldn't split with the axe even when my wrist was normal. And it's generally easier on the body, especially the wrist.
  8. sandspider
    That would make sense. Some of the nicely split parts are damp, while some of the smaller branch pieces I should have split or striped but couldn't be arsed to are pretty dry.
  9. sandspider
    Thanks. Possible, but the logs where the condensation drips tend to be damp on the outside too, and I leave those to one side...
  10. sandspider
    Our elderly neighbour had some form of brain incident that required brain surgery. She had lingering dizziness, and was unable to drive for about 6 months, but can again now. Not sure how much of the dizziness was due to the incident or to the anaesthetic/ surgery, but the anaesthetic was a factor I remember.
  11. sandspider
    Ah. You may be right there. In that case I don't want to work out what our total energy consumption is per day, it'll be terrifying. And our house isn't even that warm!
  12. sandspider
    I understand. Just seems very high for a well insulated modern house with eco friendly air source heat pump. (Though to be fair, I've not worked out how many kWh of logs and oil we get through per day). Glad we don't heat with electricity, that would cost £450 odd per month here.
  13. sandspider
    30kwh per day is huge! Was the Devon house even worse? We use about a 3rd of that, in a big, old, cold stone house in a dark Welsh valley
  14. sandspider
    Hi all Has anyone noticed any difference in speed of log drying of ash with chalara? I've had some, felled two years, cut and split and stored in the polytunnel for 6 months at least (and a hot 6 months) but a few logs still steam and seep water when they go on the fire. Given that it's ash they should be fairly low water to begin with. I wonder if chalara is affecting the drying out of the logs? I have a vague memory it does something to the cells of the wood, maybe blocking xylems and impeding drying out?
  15. sandspider
    Maybe half a cube per week? One to two recycling boxes of logs per day. (Two wood burners, at least one usually lit while I'm about, oil boiler and Ch)
  16. sandspider
    Electric saw? I have a Titan 240v mains saw, works very well and isn't too noisy. Other than that, don't process at 7am on a Sunday and generally be considerate and you should be fine!
  17. sandspider
    If it's just surface damp they should dry off in a few days with protection from rain and wind allowed to blow through. If they're properly sodden, e.g. they've been sitting in water, it will take longer. Not as long as they would take to season originally though.
  18. sandspider
    Is that bad? We put a camping kettle (quite possibly aluminium) on our woodburners from time to time.
  19. sandspider
    Does removing the cover over those tubes make much difference?
  20. sandspider
    Heat transfer ducting and pumps seem more common in France - go on holiday and bring back some ducting! Or, I found this: How it works | Recoheat WWW.RECOHEAT.CO.UK How the Recoheat stove heat recovery accessory works to maximise your stove's output and warm your home Their claims seem optimistic (half the fuel for twice the heat output) but there might be something in it... (I've never used one, I have eco fans, and two very hot rooms and plenty of cold ones!)
  21. sandspider
    Well folks, eventually I've ended up with the below, in WRC. Smells lovely! Not sure where my wife got it in the end, but think it was a local maker. So, what's the best way to preserve it? I don't mind if it goes silver / changes colour as it ages, but I don't want it to rot or get too dirty / mouldy. Some sort of oil? Though then I suppose I'd have to redo it every year or so. Not looking to change the colour with stain or anything, just keep it going for as long as I can. Thanks.
  22. sandspider
    Lit the first one in mid September, but only 2 or 3 a week at the moment. Mainly because the wife complains it's cold
  23. sandspider
    When one of our burners was installed, the installer filled the gap between stove body and chimney collar with some black siliconey stuff. It melted, ran onto the stove top and smelt horrible and chemically when I lit the fire. Installer claimed it was a bad batch of sealant and replaced it, and it's been fine since. I did wonder if he'd put the wrong stuff in. Call your installer...
  24. sandspider
    Looks like an old Villager I used to have? Could be wrong though.
  25. sandspider
    Whoops. How did you put it out?

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept