mixedangased

kindling wanted near glos ,

am after about 100/150 bags if anyone has any pm me with price/size etc can collect.

chris

out delivering this morning,got one customer i wont get to as 8 inch plus of snow,not sure i will be able to get back to yard yet as the snows drifting and blocking the lanes,just of with a load now so will see what happens

tesco quarter pounders,

the affordable way to buy your daughter that pony shes always wanted !

i have a eland 160,ex welder will weld what you want to do.

are the nuts a left hand thread on the near side like transits ?,if not are the offside ? if so the halfshafts could be on the wrong side of the axle ie- back to front.if that make sense

duck tape or if your not fussed what it looks like fibreglass the roof that will sort it,

not cheep tho

I trained as a car mechanic 25 years ago so I'm pretty handy with my machines, sometimes its more cost and time effective to get someone in.

same as for me,if i got free time i`ll fix it myself but if im really busy farm it out to someone i trust .

here`s my splitter i built about 6 yrs ago from scrap we had lying about the w/shop,only thing i had to buy was pto pump/g/box ,hoses and a few fittings

try mike at popham tree surgery he does mine .

brill

i too dont use logs,just all the rubbish i wont sell,crap that would of gone on the bonfire and the small rounds 3"and under.

Got some assistance to lift it off the trailer, dropped the rear belly plate low and behold the remnants of a very old V belt. now just the wait for a new belt. Why has the cost of V belts shot up in the past few years (or is it just me???????).

bearingbros online for belts,top quality and cheeper than my local stockist.

belts for my processor were 7 quid each goodyear,

localy were £17 each + vat cheep crap lasted a day

no not new m8,old prefab concrete panel,only use gas for cooking,electric for h/w and old villager for heat,dont like c/h

£44 3 bed semi,happy days

hi andrew,

mike popam does mine in glos 07835029923

yes tried it once yrs ago with a eland 160 amp mig,

used 1mm wire and not very successfull as couldn`t turn the power down enough.

had it on lowest setting and the wire speed flat out trying to weld alloy plate it welded of a fashon but not good.i wouldn`t bother again.

better off with a tig as said above

i thought rob d on here ?

might be interested what condition is is in and how much ?

im a member on there as i got a mk3 hilux,if you cant post let me know and i will post the question for you,sounds like diode in alt feeding back to me. tho could be the brush pack if fitted as diodes combined in the pack.would have to check mine.

have you tried it with 3 wraps on the loop ?

These are good

 

 

 

 

And you get 10% off with arbtalk.

ive still got the original oregon sharpener like that that takes files,got it of the old man when he packed up so older than i am,but still sharpens quick and easy

3 bed semi dont use the c/h cant stand it ,just cook on gas about 12 quid a quarter

Having been a plant operator and holding cards for over 20yrs I believe the whole citb/cscs/cpcs or whatever incarnation comes up system is a money making scam imo!

:thumbup:spot on

£320 nfu comp any driver inc haulage

sawtec do them,they pickup all over the country 02380653329