Jump to content

Log in or register to remove this advert

biomass boiler


donnk
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 28
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Chip is cheaper than pellets and simpler especially if you have your own wood. If you want g30 chip you just need to have a screen to make sure that any big stuff gets chipped again.

 

If you think of the chipper as part of the installation costs it doesn't seem so bad, it's what we did originally but as others have said you can save money and hassle with breakdowns etc by hiring one In.

 

Our heizohack will chip 10-15 cube an hour but that's a relatively small chipper conpared to what you can hire in.

Link to comment
Share on other sites

Biggest problem you will face if you buy your own chipper is its a very steep learning to set it up for the best production and quality. A small boiler will be very susceptible to poor quality chip and you probably will get a lot of feed problems. Muzmax produces one of the best quality chip samples I have seen if you really are going down that road.

We have had many different chippers chip for us and believe me if the machine is not set right it makes a big difference in quality and quantity.

Link to comment
Share on other sites

Chip is cheaper than pellets and simpler especially if you have your own wood. If you want g30 chip you just need to have a screen to make sure that any big stuff gets chipped again.

 

If you think of the chipper as part of the installation costs it doesn't seem so bad, it's what we did originally but as others have said you can save money and hassle with breakdowns etc by hiring one In.

 

Our heizohack will chip 10-15 cube an hour but that's a relatively small chipper conpared to what you can hire in.

 

 

Sounds like you have pretty much the same setup, how do you find it ? Much day to day hassle with the boiler ? would you mind sharing which one you went for ?

 

thanks

Link to comment
Share on other sites

Sounds like you have pretty much the same setup, how do you find it ? Much day to day hassle with the boiler ? would you mind sharing which one you went for ?

 

thanks

We've got an evoworld 199kw boiler. Had no issues except for cracked fire bricks which were about £1000 to replace after 3 years but no other major issues.

 

we use about 200 tons a year which we chip ourselves and have only had 2 easily fixable blockages. We only get a couple of barrels of Ash a year.

 

Our chip is dried so that makes a big difference. Boilers generally need less than 20% moisture content but you can go a bit more. We found it struggled to light above 30a%.

Link to comment
Share on other sites

For a setup that small just buy a small chipper like a TP175, TP's make a nice quality small chip and they have sliver breakers. You will be restricted in terms of the girth that it can chip but if you're growing your own and chipping up to around 8" it would be perfect. They also make a 10" machine. You will probably only be burning 50 ton a year so going crane fed probably isn't worth it. Use your tele handler with a muck grab to handle the timber, stick it right next to the chipper and fire it through. A couple days work with 2-3 men should see you a years supply...

Link to comment
Share on other sites

wow thats a big beast! I would be looking at 40-50kw max I think for the farmhouse and annex. It will be to compliment underfloor heating and mainly hot water.

 

Now for electricity generation .....

 

Ours is used to dry wood for our firewood business so it's more than most would need. We have a customer with one like you're looking at who we chip wood for every month or 2 straight into the hopper for , all they do is store the logs in a shed on an old trailer for a month before so they're dry enough.

 

If you want electric have you looked into chp, combined heat and power, boilers. I think they're probably too big for your needs but there might be something reasonable available now.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.