Sprocket for Echo 420?

[CarrieonCarving]

This is a long shot I know but does anyone here know if I can get a 1/4 pitch sprocket for my Echo 420 so that I can run 1/4 pitch chain on my 16" Cannon carving bar?

I've emailed sprocket suppliers and got no reply. I've also posted on the American carving forum but they don't know. They don't have the Echo 420. I've just posted on the German forum but thought I'd cover all bases and try here as well.

 

Carrie

[wisewood]

Try Rob Dyer @chainsawbars

[geoff]

As above, that's your best place to go.

[Ukulian]

The answer is probably Yes, as we have 450's running 1/4 chain. Rob D will sort you out.

[Fairywings&Chainsaws]

If I'm right that is a rim sprocket on that saw, if so Oregon 1/4 9T sprocket

Part number 543767

[rooster]

It appears that you may be correct. Rim drive.

I found this parts diagram for the CS420

 

https://www.partstree.com/parts/echo/saws-chainsaw/cs-420es-echo-chainsaw-sn-20001001-20999999/clutch-auto-oiler/

[CarrieonCarving]

Thanks Russ.

Do I need to order all 10 parts? Looks really complicated.

Shall I try to track down the equivalent parts from Oregon here in the UK or wait till I come over to the States for Reedsport.

There's not many of us who check in on forums both sides of the pond.

Carrie

[Fairywings&Chainsaws]

Just order the rim p/n 543767 from Rod D at chainsawbars.co.uk or I have one at my place, (I'm an Echo dealer)

[CarrieonCarving]

Many thanks Fairywings. Will do.

Carrie

[Ukulian]

Just order the rim p/n 543767 from Rod D at chainsawbars.co.uk or I have one at my place, (I'm an Echo dealer)

 

Lee is my Echo dealer and is excellent. He's shy, so here is how to contact him

Fairy Wings and Chainsaws