Has anyone found pattern parts for Hakki pilki

[gensetsteve]

I need to get an infeed conveyor belt for my 2x processor anyone found a company that understands the requirement. The genuine is £185 + £20 carriage plus vat. It also occured to me that most of the parts have come out of a standard part bin some where. Between us we should be able to build up a database and share experience of matching parts.

 

Example

 

I needed drive shaft joints once for a kawasaki mule they were £385 per shaft but got the joint kits from a motor factor for £12 total cost £24

[Steve Bullman]

just curious how you manage to wear down the infeed conveyor?? you must have done some serious amount of logging!

[Mr Ed]

Steve, that price you have on the infeed belt is very good. I had to replace the outfeed belt on a big horizontal grinder, and that was thousands of £. It would appear to be expensive stuff.

[woodworm]

Steve, you could try apex belting in Bury st Edmunds but i think that price you've got is pretty good

[BARNSLEY BOB]

need one for my 37, done about 350t this summer.

needs doing now the seasons over.

[gensetsteve]

Steve, that price you have on the infeed belt is very good. I had to replace the outfeed belt on a big horizontal grinder, and that was thousands of £. It would appear to be expensive stuff.

 

Will stop winging and get ordering. The belt had a small split when bought machine its now nearly through. If you get a stress fracture on your machine I think the bed goes out of line and splits the belt